Zum Hauptinhalt wechseln
Hilfe

Alienware 15 M.2 Solid State Drive

Anleitung eines Mitglieds

Anleitung eines Mitglieds

Ein großartiges Mitglied unserer Community hat diese Anleitung erstellt. Sie wird nicht von iFixit Mitarbeitern überprüft.

How to remove and replace the M.2 solid state drives in the Alienware 15.

  • Autor: Johnathan Hammond
  • Geschätzte Zeit: 5 - 10 Minuten
  • Schwierigkeitsgrad: Einfach

In this guide, we will be showing you how to remove and replace the Solid-State Drive.

Schritt 1 Remove Solid-State screw  ¶ 

WARNING: Before working inside your computer, read the  safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions  in After Working Inside Your Computer.

Schritt 1 Remove Solid-State screw  ¶ 

  • WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.

  • CAUTION : Solid-state drives are fragile. Exercise care when handling the solid-state drives, and avoid touching the gold contact pins.

  • CAUTION : To avoid data loss, do not remove the solid-state drive while the computer is in sleep or on state.

  • Remove the screw that secures the solid-state drive to the computer base.

Schritt 2 Slide the Solid-State Drive  ¶ 

Slide and remove the solid-state drive from the solid-state drive slot.

Schritt 2 Slide the Solid-State Drive  ¶ 

  • Slide and remove the solid-state drive from the solid-state drive slot.

Schritt 3 Slide the Solid-state Drive  ¶ 

Slide the solid-state drive into the solid-state drive slot.

Schritt 3 Slide the Solid-state Drive  ¶ 

  • Slide the solid-state drive into the solid-state drive slot.

Schritt 4 Align the screw  ¶ 

Align the screw hole on the solid-state drive with the screw hole on the  computer base.

Schritt 4 Align the screw  ¶ 

  • Align the screw hole on the solid-state drive with the screw hole on the computer base.

Schritt 5 Replace the Screw  ¶ 

Replace the screw that secures the solid-state drive to the computer base.

Schritt 5 Replace the Screw  ¶ 

  • Replace the screw that secures the solid-state drive to the computer base.