Zum Hauptinhalt wechseln
Hilfe

HP Pavilion 15-ab243cl Cooling Fan Replacement

Removeing the cooling fan

  • Autor: Alexander Bicigo
  • Geschätzte Zeit: 15 - 45 Minuten
  • Schwierigkeitsgrad: Moderat

This guide will show you how to access the cooling fan and replace it. The cooling fan is necessary to keep your laptop from overheating.

Abschnitte
Werkzeuge

Schritt 1 Cooling Fan  ¶ 

Use a PH00 screw driver to remove the two 3.5 mm screws holding the fan in place. Careful with the lower screw, there are two screws side by side. The screw to the left side of the device is the one you want and is connected to fan, the one on the right side is not for fan. Careful with the lower screw, there are two screws side by side. The screw to the left side of the device is the one you want and is connected to fan, the one on the right side is not for fan.

Schritt 1 Cooling Fan  ¶ 

  • Use a PH00 screw driver to remove the two 3.5 mm screws holding the fan in place.

  • Careful with the lower screw, there are two screws side by side. The screw to the left side of the device is the one you want and is connected to fan, the one on the right side is not for fan.

Schritt 2  ¶ 

Use long nose tweezers to remove connector. Fan will lift out. Use long nose tweezers to remove connector. Fan will lift out. Use long nose tweezers to remove connector. Fan will lift out.

Schritt 2  ¶ 

  • Use long nose tweezers to remove connector. Fan will lift out.