Zum Hauptinhalt wechseln
Hilfe

Braven BRV-1M Motherboard Replacement

A damaged motherboard can lead to component or device failure. Reference this guide on how to successfully replace the motherboard within the device

  • Autor: Erik Oliva
  • Geschätzte Zeit: 25 - 30 Minuten
  • Schwierigkeitsgrad: Schwierig

A damaged or disconnected motherboard can lead to potential component or entire device failure. One can reference this guide to learn how to successfully remove and replace the motherboard found within the device.

Abschnitte
Werkzeuge

Schritt 1 Motherboard  ¶ 

To remove the motherboard, proceed to unscrew the 3 Phillips #00 bit type, 13mm long screws located on both sides of the motherboard.

Schritt 1 Motherboard  ¶ 

  • To remove the motherboard, proceed to unscrew the 3 Phillips #00 bit type, 13mm long screws located on both sides of the motherboard.

Schritt 2  ¶ 

Then, proceed to unscrew the 5 Phillips #00 bit type, 9mm long screws located on the face of the charging dock.

Schritt 2  ¶ 

  • Then, proceed to unscrew the 5 Phillips #00 bit type, 9mm long screws located on the face of the charging dock.

Schritt 3  ¶ 

Disconnect the two 4-pin auxiliary button register cables connected on both sides of the motherboard.

Schritt 3  ¶ 

  • Disconnect the two 4-pin auxiliary button register cables connected on both sides of the motherboard.

Schritt 4  ¶ 

Once disconnected, carefully remove the motherboard by pulling upwards.

Schritt 4  ¶ 

  • Once disconnected, carefully remove the motherboard by pulling upwards.