Zum Hauptinhalt wechseln
Hilfe

Samsung SCV-VLUUST50 Flash Capacitor Replacement

This is a guide to replace the flash capacitor.

  • Autor: Evert Jordan
  • Geschätzte Zeit: 15 Minuten
  • Schwierigkeitsgrad: Moderat

Is your flash weak or not working at all? It could be your flash capacitor. Here's a replacement guide to help.

Schritt 1 Flash Capacitor  ¶ 

Remove the screw securing the shutter button. Lift the shutter button to remove it.

Schritt 1 Flash Capacitor  ¶ 

  • Remove the screw securing the shutter button.

  • Lift the shutter button to remove it.

Schritt 2  ¶ 

Remove the 3 visible screws with a Phillips #000 Driver Move the circuitry and wires out of the way to expose another screw, and remove it with the same driver.

Schritt 2  ¶ 

  • Remove the 3 visible screws with a Phillips #000 Driver

  • Move the circuitry and wires out of the way to expose another screw, and remove it with the same driver.

Schritt 3  ¶ 

Pull the flash capacitor out of its compartment to expose the wires connected to it. Cut the connecting wires with wire cutters. Solder the wires to the new power source with a soldering iron and electrical solder.

Schritt 3  ¶ 

  • Pull the flash capacitor out of its compartment to expose the wires connected to it.

  • Cut the connecting wires with wire cutters.

  • Solder the wires to the new power source with a soldering iron and electrical solder.