Zum Hauptinhalt wechseln
Hilfe

Dell Inspiron 13z N301z Hard-Drive Assembly Replacement

Anleitung eines Mitglieds

Anleitung eines Mitglieds

Ein großartiges Mitglied unserer Community hat diese Anleitung erstellt. Sie wird nicht von iFixit Mitarbeitern überprüft.

  • Autor: Terrence15
  • Geschätzte Zeit: 4 - 9 Minuten
  • Schwierigkeitsgrad: Einfach

In this guide, we will be showing you how to remove and replace the Hard-Drive Assembly.

Schritt 1 Removing the Screws  ¶ 

WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the instructions in  Before You Begin.

Schritt 1 Removing the Screws  ¶ 

  • WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the instructions in Before You Begin.

  • CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).

  • Remove the four screws that secure the hard-drive assembly to the computer base.

Schritt 2 Lifting the Connector Latch  ¶ 

Lift the connector latch and pull the pull-tab to disconnect the hard-drive cable from the connector on the system board.

Schritt 2 Lifting the Connector Latch  ¶ 

  • Lift the connector latch and pull the pull-tab to disconnect the hard-drive cable from the connector on the system board.

Schritt 3 Lifting the Hard-Drive Assembly  ¶ 

Lift the hard-drive assembly out of the computer base.

Schritt 3 Lifting the Hard-Drive Assembly  ¶ 

  • Lift the hard-drive assembly out of the computer base.

Schritt 4 Remove the Screws  ¶ 

Remove the four screws that secure the hard-drive bracket to the hard drive.

Schritt 4 Remove the Screws  ¶ 

  • Remove the four screws that secure the hard-drive bracket to the hard drive.

Schritt 5 Lifting the Hard Drive  ¶ 

Lift the hard drive out of the hard-drive bracket. Lift the hard drive out of the hard-drive bracket.

Schritt 5 Lifting the Hard Drive  ¶ 

  • Lift the hard drive out of the hard-drive bracket.

Schritt 6 Disconnecting the Interposer  ¶ 

Pull the interposer to disconnect it from the hard drive.

Schritt 6 Disconnecting the Interposer  ¶ 

  • Pull the interposer to disconnect it from the hard drive.

Schritt 7 Connecting the Interposer  ¶ 

Connect the interposer to the NEW hard drive.

Schritt 7 Connecting the Interposer  ¶ 

  • Connect the interposer to the NEW hard drive.

Schritt 8 Placing the Hard-Drive  ¶ 

Place the hard drive in the hard-drive bracket. Place the hard drive in the hard-drive bracket.

Schritt 8 Placing the Hard-Drive  ¶ 

  • Place the hard drive in the hard-drive bracket.

Schritt 9 Replace the Screws  ¶ 

Replace the four screws the hard-drive bracket to the hard drive.

Schritt 9 Replace the Screws  ¶ 

  • Replace the four screws the hard-drive bracket to the hard drive.

Schritt 10 Placing the Hard-Drive Assembly  ¶ 

Place the hard-drive assembly in the computer base.

Schritt 10 Placing the Hard-Drive Assembly  ¶ 

  • Place the hard-drive assembly in the computer base.

Schritt 11 Sliding the Hard-Drive Cable  ¶ 

Slide the hard-drive cable into the connector on the system board and press down on the latch to secure the hard-drive cable.

Schritt 11 Sliding the Hard-Drive Cable  ¶ 

  • Slide the hard-drive cable into the connector on the system board and press down on the latch to secure the hard-drive cable.

Schritt 12 Replace the Screws  ¶ 

Replace the four screws that secure the hard-drive assembly to the computer base.

Schritt 12 Replace the Screws  ¶ 

  • Replace the four screws that secure the hard-drive assembly to the computer base.