Zum Hauptinhalt wechseln
Hilfe

ASUS Portable AiO PT2001 Speaker Replacement

How to replace the speakers in an ASUS Portable AiO PT2001.

This guide will demonstrate how to remove the pair of speakers. This process is straightforward, and no special tools are necessary.

Abschnitte
Werkzeuge

Schritt 1 Speaker  ¶ 

The two in-house speakers are located near the sides of the device with the motherboard in between. Remove the two 2.35 mm Phillips #1 screws from each speaker.

Schritt 1 Speaker  ¶ 

  • The two in-house speakers are located near the sides of the device with the motherboard in between.

  • Remove the two 2.35 mm Phillips #1 screws from each speaker.

Schritt 2  ¶ 

The two speakers are attached to each other with a cord that is threaded along the side of the casing. Gently pull the wire out The cord is secured under two pieces of tape with multiple other wires. Make sure that you only remove the wire connecting the speakers.

Schritt 2  ¶ 

  • The two speakers are attached to each other with a cord that is threaded along the side of the casing. Gently pull the wire out

  • The cord is secured under two pieces of tape with multiple other wires. Make sure that you only remove the wire connecting the speakers.

  • Keep in mind that when replacing the wires, you will need to secure the tape again. Accordingly, be careful not to tear the tape when peeling it.

Schritt 3  ¶ 

Pull the cord attached to the speaker out of the motherboard

Schritt 3  ¶ 

  • Pull the cord attached to the speaker out of the motherboard