Hilfe

Google Home Interconnect Cable Replacement

This guide will teach you how to replace the interconnect for your Google Home.

  • Autor: Gabe Hyun
  • Geschätzte Zeit: 5 - 10 Minuten
  • Schwierigkeitsgrad: Einfach

This guide will teach you how to take apart your Google Home to remove a broken or torn interconnect cable and replace it with a new one.

Schritt 1 Interconnect Cable  ¶ 

Removing the lid too quickly could cause you to tear the interconnect cable that attaches the base to the top of the lid. Pull off the Google Home’s magnetically attached base and set it aside. Using a Torx T6 screwdriver head, unscrew the four 1.7mm Torx screws deep in the speaker recess so that you can remove the lid.

Schritt 1 Interconnect Cable  ¶ 

  • Removing the lid too quickly could cause you to tear the interconnect cable that attaches the base to the top of the lid.

  • Pull off the Google Home’s magnetically attached base and set it aside.

  • Using a Torx T6 screwdriver head, unscrew the four 1.7mm Torx screws deep in the speaker recess so that you can remove the lid.

  • After all four screws are out, pop the lid off the device to open the capsule.

Schritt 2  ¶ 

Carefully remove the interconnect cable using a pair of tweezers.

Schritt 2  ¶ 

  • Carefully remove the interconnect cable using a pair of tweezers.