Zum Hauptinhalt wechseln
Hilfe

Black and Decker Toast R Oven Door Spring Mechanism Replacement

Teile und verbessere

Teile und verbessere

Die Schritte in dieser Anleitung sollten getrennt und in eine Abfolge von grundständigen Anleitungen umgeformt werden.

To replace a worn out or loose door spring on the Black and Decker Toast R Oven.

  • Autor: Jonathan
  • Geschätzte Zeit: 20 - 30 Minuten
  • Schwierigkeitsgrad: Moderat

If the toaster door does not stay shut, heat will escape and the toaster will not work properly. This problem can be solved by simply replacing the door spring mechanism.

Schritt 1 Door Spring Mechanism  ¶ 

Use the screwdriver to remove the spring from the unit. Place the screwdriver inside the spring loop.

Schritt 1 Door Spring Mechanism  ¶ 

  • Use the screwdriver to remove the spring from the unit.

  • Place the screwdriver inside the spring loop.

  • Pull to unhinge the spring from the back panel.

Schritt 2  ¶ 

Remove the spring from the door mechanism by pulling it off.

Schritt 2  ¶ 

  • Remove the spring from the door mechanism by pulling it off.

  • Replace the old spring with a new spring.

  • When inserting a new spring, make sure that the spring is connected to the lower hole of the back panel (the hole above is used for the back casing).