Zum Hauptinhalt wechseln
Hilfe

HP EliteBook 840 G5 SSD Storage Replacement

This repair guide gives the steps to an easy removal of the back plate, and the replacement of the SSD storage in the HP Elitebook 840 G5.

If you are experiencing difficulties with the functionality of the solid-state drive (SSD storage) in your HP Elitebook 840 G5, this guide will provide you with clear steps on replacing your SSD storage. The replacement only requires the listed screwdriver and plastic opening kit under the "Parts" category of this guide. While this replacement is relatively simple, proceed with caution as the entire backing of your computer will be removed leaving the internal electrical components exposed during the SSD replacement.

Abschnitte
Werkzeuge

Schritt 1 SSD Storage  ¶ 

Using a Phillips #1 screwdriver, remove the single 2mm screw that holds the SSD storage in place.

Schritt 1 SSD Storage  ¶ 

  • Using a Phillips #1 screwdriver, remove the single 2mm screw that holds the SSD storage in place.

Schritt 2  ¶ 

The SSD storage will pop up. Gently pull out the SSD from its slot.

Schritt 2  ¶ 

  • The SSD storage will pop up.

  • Gently pull out the SSD from its slot.