Zum Hauptinhalt wechseln
Hilfe

Sanitaire SC684 front wheel replacement

Grammatikfehler

Grammatikfehler

Wecke den Deutschlehrer in dir und hilf, die Grammatik dieser Anleitung zu verbessern!

Action Shots

Action Shots

Sei ein Actionheld! Diese Anleitung benötigt Bilder, damit besser veranschaulicht werden kann, wie bestimmte Handgriffe ausgeführt werden.

Fehler in den Markups

Fehler in den Markups

Diese Anleitung benötigt bessere Markups. Hilf aus, indem du sie korrigierst oder einige Markup-Anmerkungen erstellst.

Bessere Einleitung

Bessere Einleitung

Verbessere diese Anleitung, indem du die Einleitung vervollständigst oder überarbeitest.

This guide will give step by step instructions on how to remove the front wheels of the Sanitaire SC684.

  • Autor: Caycie Pascual
  • Geschätzte Zeit: 10 Minuten
  • Schwierigkeitsgrad: Einfach
Werkzeuge
Relevante Ersatzteile

Schritt 1 Front Wheels  ¶ 

Be sure to unplug the vacuum before disassembling it to prevent electric shock.

Schritt 1 Front Wheels  ¶ 

  • Be sure to unplug the vacuum before disassembling it to prevent electric shock.

  • Lay vacuum on side.

  • Using a Phillips screwdriver, unscrew the screw behind the front wheels, on the edge of the underside of the vacuum cleaner.

Schritt 2  ¶ 

Stand the vacuum upright and identify the dial on the front of the vacuum. Unscrew the screw using a Torx 20 screwdriver

Schritt 2  ¶ 

  • Stand the vacuum upright and identify the dial on the front of the vacuum.

  • Unscrew the screw using a Torx 20 screwdriver

  • Pull the dial out.

Schritt 3  ¶ 

Lift the cover off of the vacuum.

Schritt 3  ¶ 

  • Lift the cover off of the vacuum.

Schritt 4  ¶ 

Identify the two gray metal plates at the front of the vacuum.

Schritt 4  ¶ 

  • Identify the two gray metal plates at the front of the vacuum.

  • Using the T20 Torx screwdriver, remove the four screws on the smaller gray plate holding the larger gray metal plates.

Schritt 5  ¶ 

Remove the small metal plate with the black bolt in the center.

Schritt 5  ¶ 

  • Remove the small metal plate with the black bolt in the center.

  • Repeat on opposite side near the other wheel

Schritt 6  ¶ 

Remove the larger gray metal plate.

Schritt 6  ¶ 

  • Remove the larger gray metal plate.

  • Repeat on opposite side near other wheel.

Schritt 7  ¶ 

Remove the front wheels by lifting the silver bar that attaches the two wheels. Detach the spring attaching the wheels to the vacuum.

Schritt 7  ¶ 

  • Remove the front wheels by lifting the silver bar that attaches the two wheels.

  • Detach the spring attaching the wheels to the vacuum.

Schritt 8  ¶ 

Remove a wheel from the wheel's axel by pulling off the wheel. Slide spring off.

Schritt 8  ¶ 

  • Remove a wheel from the wheel's axel by pulling off the wheel.

  • Slide spring off.