Zum Hauptinhalt wechseln
Hilfe

Nostalgia Electrics RHP-310 Replacing Housing Replacement

Aufzählungszeichen!

Aufzählungszeichen!

Ein verbesserter Einsatz von Markups und der Farbe bzw. Art von Aufzählungszeichen würde diese Anleitung verständlicher machen.

If your outer housing is cracked and beyond repair, you will want to use this guide to replace the housing. Follow the steps below.

  • Autor: Dana Clarke
  • Geschätzte Zeit: 10 Minuten
  • Schwierigkeitsgrad: Moderat

Follow the steps for replacing the power switch. This guide will start right after replacing power switch ends.

Abschnitte
Werkzeuge
Relevante Ersatzteile

Schritt 1 Replacing Housing  ¶ 

Now that the power switch is disconnected from the popper, you will need to remove the white top. Gently remove the heating component from the popper.

Schritt 1 Replacing Housing  ¶ 

  • Now that the power switch is disconnected from the popper, you will need to remove the white top.

  • Gently remove the heating component from the popper.

  • Unscrew the four screws (11mm Philips #2 screws) that connect the white top to the housing.

Schritt 2  ¶ 

Remove the white top from the housing.

Schritt 2  ¶ 

  • Remove the white top from the housing.

  • Save the screws from previous step. You will need them to connect the new housing to the white top.