Zum Hauptinhalt wechseln
Hilfe

Nostalgia Electrics RHP-310 Replacing Fan Replacement

Aufzählungszeichen!

Aufzählungszeichen!

Ein verbesserter Einsatz von Markups und der Farbe bzw. Art von Aufzählungszeichen würde diese Anleitung verständlicher machen.

Unklarer Text

Unklarer Text

Teile des Textes dieser Anleitung sind verwirrend, doppelt oder vom Thema abweichend. Kläre das, indem du sie bearbeitest!

Use this guide to replace the fan inside the popper.

  • Autor: Dana Clarke
  • Geschätzte Zeit: 20 - 25 Minuten
  • Schwierigkeitsgrad: Moderat

This guide will outline how to replace the fan inside the heating component.

Schritt 1 Replacing Fan  ¶ 

Now that the white top is disconnected from the housing, remove the heating component from inside the device.

Schritt 1 Replacing Fan  ¶ 

  • Now that the white top is disconnected from the housing, remove the heating component from inside the device.

Schritt 2  ¶ 

Unscrew the three screws (10 mm Philips #2 screws) that hold the heating component together.

Schritt 2  ¶ 

  • Unscrew the three screws (10 mm Philips #2 screws) that hold the heating component together.

Schritt 3  ¶ 

Make sure to keep the screws.  You will need them to put the heating component back together.

Schritt 3  ¶ 

  • Make sure to keep the screws. You will need them to put the heating component back together.

  • Pull the heating component apart.

Schritt 4  ¶ 

Locate the fan. Pull the fan off the motor firmly but gently.

Schritt 4  ¶ 

  • Locate the fan.

  • Pull the fan off the motor firmly but gently.

  • When you pull the fan off the motor, be careful. Do not pull to hard or you will break the motor.

Schritt 5  ¶ 

You can now replace the fan.

Schritt 5  ¶ 

  • You can now replace the fan.

  • If there is debris stuck in the fan, you can easily clean it out from the fan in this step.