Zum Hauptinhalt wechseln
Hilfe

Dell Inspiron 14z N114z Memory Modules Replacement

Fehlende grundständige Anleitungen

Fehlende grundständige Anleitungen

In dieser Anleitung fehlen Informationen, wie man am besten anfängt. Erstelle eine grundständige Anleitung!

Anleitung eines Mitglieds

Anleitung eines Mitglieds

Ein großartiges Mitglied unserer Community hat diese Anleitung erstellt. Sie wird nicht von iFixit Mitarbeitern überprüft.

  • Autor: Terrence15
  • Geschätzte Zeit: 15 - 50 Sekunden
  • Schwierigkeitsgrad: Sehr einfach

In this guide, we will be showing you how to remove and replace the Memory Modules.

Schritt 1 Popping up the Memory Module  ¶ 

WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the instructions in "Before You Begin". CAUTION: To prevent damage to the memory-module connector, do not use tools to spread the memory module securing clips.

Schritt 1 Popping up the Memory Module  ¶ 

  • WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the instructions in "Before You Begin".

  • CAUTION: To prevent damage to the memory-module connector, do not use tools to spread the memory module securing clips.

  • Use your fingertips to carefully spread apart the securing clips on each end of the memory-module connector until the memory module pops up.

Schritt 2 Remove the Memory Module  ¶ 

Remove the memory module from the memory-module connector.

Schritt 2 Remove the Memory Module  ¶ 

  • Remove the memory module from the memory-module connector.

Schritt 3 Align the Notch  ¶ 

Align the notch on the NEW memory module with the tab in the memory-module connector.

Schritt 3 Align the Notch  ¶ 

  • Align the notch on the NEW memory module with the tab in the memory-module connector.

Schritt 4 Sliding the Module  ¶ 

Slide the memory module firmly into the memory-module connector at a 45-degree angle, and then press down the memory module on both sides until it clicks into place. If you do not hear the click, remove the memory module and reinstall it.

Schritt 4 Sliding the Module  ¶ 

  • Slide the memory module firmly into the memory-module connector at a 45-degree angle, and then press down the memory module on both sides until it clicks into place. If you do not hear the click, remove the memory module and reinstall it.

  • NOTE: If the memory module is not installed properly, the computer may not boot.