Zum Hauptinhalt wechseln
Hilfe

Dell Inspiron 14z N114z Display Assembly Replacement

Anleitung eines Mitglieds

Anleitung eines Mitglieds

Ein großartiges Mitglied unserer Community hat diese Anleitung erstellt. Sie wird nicht von iFixit Mitarbeitern überprüft.

  • Autor: Terrence15
  • Geschätzte Zeit: 10 - 35 Minuten
  • Schwierigkeitsgrad: Moderat

In this guide, we will be showing you how to remove and replace the Display Assembly.

Schritt 1 Remove the Screws  ¶ 

WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the instructions in "Before You Begin".

Schritt 1 Remove the Screws  ¶ 

  • WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the instructions in "Before You Begin".

  • CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).

  • Remove the two screws that secure the display assembly to the computer base.

Schritt 2 Turn over the Computer  ¶ 

Turn the computer over and open the display as far as possible.

Schritt 2 Turn over the Computer  ¶ 

  • Turn the computer over and open the display as far as possible.

Schritt 3 Lifting the Connector Latch  ¶ 

Lift the connector latch and disconnect the display cable from the connector on the system board.

Schritt 3 Lifting the Connector Latch  ¶ 

  • Lift the connector latch and disconnect the display cable from the connector on the system board.

Schritt 4 Note the Routing  ¶ 

Note the routing of the display, camera, and mini-card antenna cables, and remove the cables from their routing guides.

Schritt 4 Note the Routing  ¶ 

  • Note the routing of the display, camera, and mini-card antenna cables, and remove the cables from their routing guides.

Schritt 5 Remove the Screws  ¶ 

Remove the two screws that secure the display assembly to the computer base.

Schritt 5 Remove the Screws  ¶ 

  • Remove the two screws that secure the display assembly to the computer base.

Schritt 6 Lifting the Display Assembly  ¶ 

Lift the display assembly off the computer base.

Schritt 6 Lifting the Display Assembly  ¶ 

  • Lift the display assembly off the computer base.

Schritt 7 Placing the Display Assembly  ¶ 

Place the NEW display assembly in position and replace the two screws that secure the display assembly to the computer base. NOTE: Ensure that no cables are caught between the display assembly and the computer base.

Schritt 7 Placing the Display Assembly  ¶ 

  • Place the NEW display assembly in position and replace the two screws that secure the display assembly to the computer base.

  • NOTE: Ensure that no cables are caught between the display assembly and the computer base.

Schritt 8 Route the Cables  ¶ 

Route the display, camera, and mini-card antenna cables through their routing guides.

Schritt 8 Route the Cables  ¶ 

  • Route the display, camera, and mini-card antenna cables through their routing guides.

Schritt 9 Sliding the Display Cable  ¶ 

Slide the display cable in the connector on the system board and press down the latch to secure the cable.

Schritt 9 Sliding the Display Cable  ¶ 

  • Slide the display cable in the connector on the system board and press down the latch to secure the cable.

Schritt 10 Replace the Screws  ¶ 

Turn the computer over.

Schritt 10 Replace the Screws  ¶ 

  • Turn the computer over.

  • Replace the two screws that secure the display assembly to the computer base.