Zum Hauptinhalt wechseln
Hilfe

Dell Inspiron 15 3565 Display Assembly Replacement

Anleitung eines Mitglieds

Anleitung eines Mitglieds

Ein großartiges Mitglied unserer Community hat diese Anleitung erstellt. Sie wird nicht von iFixit Mitarbeitern überprüft.

  • Autor: Terrence15
  • Geschätzte Zeit: 6 - 15 Minuten
  • Schwierigkeitsgrad: Moderat

In this guide, we will be showing you how to remove and replace the Display Assembly.

Schritt 1 Remove the Screws  ¶ 

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.

Schritt 1 Remove the Screws  ¶ 

  • WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.

  • Remove the three screws (2.5x8) that secure the display hinges to the palm-rest assembly.

Schritt 2 Open the Display Hinges  ¶ 

Open the display hinges to an angle of 90 degrees.

Schritt 2 Open the Display Hinges  ¶ 

  • Open the display hinges to an angle of 90 degrees.

Schritt 3 Peeling the Tape  ¶ 

Peel the tape that secures the display cable to the palm-rest assembly.

Schritt 3 Peeling the Tape  ¶ 

  • Peel the tape that secures the display cable to the palm-rest assembly.

Schritt 4 Open the Latch  ¶ 

Open the latch and disconnect the display cable.

Schritt 4 Open the Latch  ¶ 

  • Open the latch and disconnect the display cable.

Schritt 5 Open the Latch  ¶ 

Open the latch and disconnect the display cable.

Schritt 5 Open the Latch  ¶ 

  • Open the latch and disconnect the display cable.

Schritt 6 Note the Routing  ¶ 

Note the display cable routing and remove the display cable from the routing guides on the palm-rest assembly.

Schritt 6 Note the Routing  ¶ 

  • Note the display cable routing and remove the display cable from the routing guides on the palm-rest assembly.

Schritt 7 Note the Antenna Cable  ¶ 

Note the antenna cable routing and remove the cable from its routing guides on the palm-rest assembly.

Schritt 7 Note the Antenna Cable  ¶ 

  • Note the antenna cable routing and remove the cable from its routing guides on the palm-rest assembly.

Schritt 8 Open the Palm-Rest Assembly  ¶ 

Open the palm-rest assembly at an angle and slide it off the display assembly.

Schritt 8 Open the Palm-Rest Assembly  ¶ 

  • Open the palm-rest assembly at an angle and slide it off the display assembly.

Schritt 9 Placing the Display Assembly  ¶ 

Place the NEW display assembly on a clean, flat surface.

Schritt 9 Placing the Display Assembly  ¶ 

  • Place the NEW display assembly on a clean, flat surface.

Schritt 10 Placing the Palm-Rest Assembly  ¶ 

Place the palm-rest assembly on the display assembly.

Schritt 10 Placing the Palm-Rest Assembly  ¶ 

  • Place the palm-rest assembly on the display assembly.

Schritt 11 Close the Hinges  ¶ 

Close the display hinges and align the screw holes on the display hinges with the screw holes on the palm-rest assembly.

Schritt 11 Close the Hinges  ¶ 

  • Close the display hinges and align the screw holes on the display hinges with the screw holes on the palm-rest assembly.

Schritt 12 Replace the Screws  ¶ 

Replace the three screws (2.5x8) that secure the display hinges to the palm-rest assembly.

Schritt 12 Replace the Screws  ¶ 

  • Replace the three screws (2.5x8) that secure the display hinges to the palm-rest assembly.

Schritt 13 Routing the Antenna Cables  ¶ 

Route the antenna cables through the routing guides on the palm-rest assembly.

Schritt 13 Routing the Antenna Cables  ¶ 

  • Route the antenna cables through the routing guides on the palm-rest assembly.

Schritt 14 Connecting the Display Cable  ¶ 

Connect the display cable and close the latch to secure the cable.

Schritt 14 Connecting the Display Cable  ¶ 

  • Connect the display cable and close the latch to secure the cable.

Schritt 15 Route the Display Cable  ¶ 

Route the display cable through the routing guides on the palm-rest assembly

Schritt 15 Route the Display Cable  ¶ 

  • Route the display cable through the routing guides on the palm-rest assembly

Schritt 16 Adhering the Tape  ¶ 

Adhere the tape that secures the display cable to the palm-rest assembly.

Schritt 16 Adhering the Tape  ¶ 

  • Adhere the tape that secures the display cable to the palm-rest assembly.

Schritt 17 Close the Display  ¶ 

Kein Bild

Schritt 17 Close the Display  ¶ 

  • Close the display and turn the computer over.