Samsung Galaxy Note5 Rear Glass Replacement
Remove and replace the cracked glass back cover for the Samsung Galaxy Note5.
- Autor: Arthur Shi
- Geschätzte Zeit: 40 Minuten - 1 Stunde
- Schwierigkeitsgrad: Moderat
Follow this guide to remove the glass back cover for your Samsung Galaxy Note5.
Bette diese Anleitung ein
Wähle eine Größe und kopiere den nachfolgenden Code, um diese Anleitung als kleines Widget auf deiner Seite / in deinem Forum einzubetten.
Schritt 2 ¶
Apply a suction cup as close as possible to the bottom edge of the phone.
Lift on the suction cup and insert an opening pick under the rear glass.
Schritt 3 ¶
Once the pick is in place, reheat the edge with an iOpener for another minute.
Schritt 4 ¶
Slide the pick down the bottom edge of the phone.
Leave the pick in place to prevent the adhesive from resealing, and grab another pick as you proceed to the next step.
Schritt 5 ¶
Insert another pick and slowly cut around the corner of the phone.
Schritt 6 ¶
Before cutting further, apply a heated iOpener to the long edge.
Schritt 7 ¶
Repeat the previous heating and cutting procedure for the remaining three sides of the phone.
Leave an opening pick in each edge of the phone as you continue to the next to prevent the adhesive from resealing.
Schritt 8 ¶
Use an opening pick to cut any remaining adhesive around the edges of the glass.
Lift the glass and remove it from the phone.
Schritt 9 ¶
Use tweezers to peel away any remaining adhesive from both the back cover and the phone's chassis.
Clean the adhesion areas with high concentration isopropyl alcohol (at least 90%) and a lint-free cloth. Swipe in one direction only, not back and forth. This will help prep the surface for the new adhesive.
Be sure to turn on your phone and test your repair before installing new adhesive and resealing the phone.
After installing the rear cover, apply strong, steady pressure to your phone for several minutes to help the adhesive form a good bond, such as by placing it under a stack of heavy books.