Zum Hauptinhalt wechseln
Hilfe

Mitsubishi WD57734 Lamp Replacement

Action Shots

Action Shots

Sei ein Actionheld! Diese Anleitung benötigt Bilder, damit besser veranschaulicht werden kann, wie bestimmte Handgriffe ausgeführt werden.

Benötigt Bessere Bilder

Benötigt Bessere Bilder

Schönere Fotos werden diese Anleitung verbessern. Trage dazu bei, indem du die Alten bearbeitest oder Neue aufnimmst und hochlädst!

Install a new lamp in your Mitsubishi WD-57734 DLP HDTV.

  • Autor: Herman Chai
  • Geschätzte Zeit: 15 Minuten
  • Schwierigkeitsgrad: Einfach

Accessing the lamp in this television is straightforward and requires minimal disassembly.

Schritt 1 Lamp  ¶ 

Before disassembling your television, be sure it is powered off and unplugged.

Schritt 1 Lamp  ¶ 

  • Before disassembling your television, be sure it is powered off and unplugged.

  • Remove the single 18 mm Phillips #1 screw on the lamp access panel.

Schritt 2  ¶ 

Pull the lamp access panel off of the back panel of the television by pulling straight back on the left side of the panel near the screw then pulling to the left.

Schritt 2  ¶ 

  • Pull the lamp access panel off of the back panel of the television by pulling straight back on the left side of the panel near the screw then pulling to the left.

Schritt 3  ¶ 

Loosen the two Phillips #2 screws securing the lamp housing to the television until the screws will swivel vertically.

Schritt 3  ¶ 

  • Loosen the two Phillips #2 screws securing the lamp housing to the television until the screws will swivel vertically.

  • These two screws are permanently attached to the lamp housing and cannot be removed completely.

Schritt 4  ¶ 

Using the handle, pull the lamp housing straight back out of the television.

Schritt 4  ¶ 

  • Using the handle, pull the lamp housing straight back out of the television.

  • Do not touch the glass of the lamp with your bare hands. The oil from your fingers can distort the TV image and lead to other issues.