Zum Hauptinhalt wechseln
Hilfe

iPad 3 Wi-Fi Front Panel Assembly Replacement

Nicht eigenständige Anleitung

Nicht eigenständige Anleitung

Bitte beachte, dass diese Anleitung nur eine grundständige Anleitung für andere Anleitungen ist.

Preq for removing the front panel. Specific to the iPad 3, also involves moving the LCD over.

  • Autor: Walter Galan
  • Geschätzte Zeit: 15 - 30 Minuten
  • Schwierigkeitsgrad: Moderat

Preq for removing the front panel. Specific to the iPad 3, also involves moving the LCD over.

Schritt 1 Front Panel Assembly  ¶ 

Remove the four 2 mm Phillips #00 screws securing the LCD to the aluminum frame.

Schritt 1 Front Panel Assembly  ¶ 

  • Remove the four 2 mm Phillips #00 screws securing the LCD to the aluminum frame.

Schritt 2  ¶ 

Using a plastic opening tool or a spudger, lift the right edge of the LCD out of the iPad. Rotate the LCD along its left edge and lay it down on top of the front panel. Be careful as you move the LCD. The ribbon cable is fragile and may break if it is flexed too much.

Schritt 2  ¶ 

  • Using a plastic opening tool or a spudger, lift the right edge of the LCD out of the iPad.

  • Rotate the LCD along its left edge and lay it down on top of the front panel.

  • Be careful as you move the LCD. The ribbon cable is fragile and may break if it is flexed too much.