Zum Hauptinhalt wechseln
Hilfe

iPad 3 Wi-Fi LCD Replacement

Empfohlene Anleitung

Empfohlene Anleitung

Diese Anleitung wird von den iFixit-Mitarbeitern als außergewöhnlich gut eingestuft.

Replace the LCD in your iPad 3 Wi-Fi.

  • Autor: Walter Galan
  • Geschätzte Zeit: 50 Minuten - 2 Stunden
  • Schwierigkeitsgrad: Sehr schwierig

The third generation iPad loses a lot of luster when its gorgeous retina display stops working. Use this guide to get your iPad back on its resolutionary feet.

Abschnitte
Werkzeuge

Schritt 1 LCD  ¶ 

Using the tip of a spudger, peel back the piece of tape covering the LCD ribbon cable connector.

Schritt 1 LCD  ¶ 

  • Using the tip of a spudger, peel back the piece of tape covering the LCD ribbon cable connector.

Schritt 2  ¶ 

Flip up the retaining flap on the LCD ribbon cable ZIF connector. Using your fingers or a pair of tweezers, pull the LCD ribbon cable from its socket on the logic board. Using your fingers or a pair of tweezers, pull the LCD ribbon cable from its socket on the logic board.

Schritt 2  ¶ 

  • Flip up the retaining flap on the LCD ribbon cable ZIF connector.

  • Using your fingers or a pair of tweezers, pull the LCD ribbon cable from its socket on the logic board.

Schritt 3  ¶ 

Without touching the front of the LCD, lift the LCD off the front panel.

Schritt 3  ¶ 

  • Without touching the front of the LCD, lift the LCD off the front panel.