Zum Hauptinhalt wechseln
Hilfe

iPad 3 Wi-Fi Front Panel Assembly Replacement

Nicht eigenständige Anleitung

Nicht eigenständige Anleitung

Bitte beachte, dass diese Anleitung nur eine grundständige Anleitung für andere Anleitungen ist.

Prerequisite only to replace a cracked or broken Front Panel on the third generation iPad 3 4G

Prerequisite-only to replace the front panel in the third generation iPad 4G.

Schritt 1 Front Panel Assembly  ¶ 

If necessary, peel back the piece of tape that secures the digitizer ribbon cable to the logic board. Flip up the retaining flap on both of the digitizer ribbon cable ZIF connectors. Flip up the retaining flap on both of the digitizer ribbon cable ZIF connectors.

Schritt 1 Front Panel Assembly  ¶ 

  • If necessary, peel back the piece of tape that secures the digitizer ribbon cable to the logic board.

  • Flip up the retaining flap on both of the digitizer ribbon cable ZIF connectors.

Schritt 2  ¶ 

Use the flat end of a spudger to loosen the adhesive underneath the digitizer ribbon cable. Very carefully pull the digitizer ribbon cable straight out of its sockets on the logic board.

Schritt 2  ¶ 

  • Use the flat end of a spudger to loosen the adhesive underneath the digitizer ribbon cable.

  • Very carefully pull the digitizer ribbon cable straight out of its sockets on the logic board.

Schritt 3  ¶ 

Peel back the digitizer ribbon cable and use the flat end of a spudger to release the adhesive securing the cable to the rear aluminum case. Peel back the digitizer ribbon cable and use the flat end of a spudger to release the adhesive securing the cable to the rear aluminum case.

Schritt 3  ¶ 

  • Peel back the digitizer ribbon cable and use the flat end of a spudger to release the adhesive securing the cable to the rear aluminum case.

Schritt 4  ¶ 

Using your fingers, pull the digitizer ribbon cable out of its recess in the aluminum frame.

Schritt 4  ¶ 

  • Using your fingers, pull the digitizer ribbon cable out of its recess in the aluminum frame.

  • Remove the front panel from the iPad.