Zum Hauptinhalt wechseln
Hilfe

Hover-1 Titan Bottom Left Panel Replacement

Nicht eigenständige Anleitung

Nicht eigenständige Anleitung

Bitte beachte, dass diese Anleitung nur eine grundständige Anleitung für andere Anleitungen ist.

How to replace the bottom left panel of the Hover-1 Titan.

  • Autor: Dana Ebe
  • Geschätzte Zeit: 1 - 5 Minuten
  • Schwierigkeitsgrad: Einfach

Schritt 1 Bottom Left Panel  ¶ 

Flip the hoverboard so the bottom is facing up. The left side is the side that has the charge port. There is also an "L" on the metal plate underneath the wires.

Schritt 1 Bottom Left Panel  ¶ 

  • Flip the hoverboard so the bottom is facing up.

  • The left side is the side that has the charge port. There is also an "L" on the metal plate underneath the wires.

Schritt 2  ¶ 

Using a Phillips #1 screwdriver, remove the two 14 mm screws located closest to the center of the hoverboard. Using a Phillips #1 screwdriver, remove the four 12 mm screws located in the middle of the panel.

Schritt 2  ¶ 

  • Using a Phillips #1 screwdriver, remove the two 14 mm screws located closest to the center of the hoverboard.

  • Using a Phillips #1 screwdriver, remove the four 12 mm screws located in the middle of the panel.

  • Using a Phillips #1 screwdriver, remove two 15 mm screws located closest to the wheel.

Schritt 3  ¶ 

Grip the bottom left panel and lift up to remove. Grip the bottom left panel and lift up to remove. Grip the bottom left panel and lift up to remove.

Schritt 3  ¶ 

  • Grip the bottom left panel and lift up to remove.