Zum Hauptinhalt wechseln
Hilfe

HP Mini 210-2070NR Battery and Service Access Cover Replacement

Fehler in den Markups

Fehler in den Markups

Diese Anleitung benötigt bessere Markups. Hilf aus, indem du sie korrigierst oder einige Markup-Anmerkungen erstellst.

Teile und verbessere

Teile und verbessere

Die Schritte in dieser Anleitung sollten getrennt und in eine Abfolge von grundständigen Anleitungen umgeformt werden.

This is a step by step guide showing how to remove the battery and Service Access Cover.

  • Autor: Sean Kuster
  • Geschätzte Zeit: 5 Minuten
  • Schwierigkeitsgrad: Sehr einfach

Use this guide to remove the battery and the back cover of your laptop in order to repair or install new parts.

Schritt 1 Battery and Service Access Cover  ¶ 

Before beginning, make sure that your computer is turned off and all external power cords are disconnected.

Schritt 1 Battery and Service Access Cover  ¶ 

  • Before beginning, make sure that your computer is turned off and all external power cords are disconnected.

  • Close the laptop and turn it over, so that the underside is up and the silver battery bay is facing towards you.

Schritt 2  ¶ 

Locate the battery locking latch on the bottom right corner and slide it inward to unlock the battery. Locate the battery release latch on the bottom left and slide it inward. Pull the battery towards you to remove it from the laptop.

Schritt 2  ¶ 

  • Locate the battery locking latch on the bottom right corner and slide it inward to unlock the battery.

  • Locate the battery release latch on the bottom left and slide it inward.

  • Pull the battery towards you to remove it from the laptop.

Schritt 3  ¶ 

Locate the service access cover release lever and slide it to the right. While holding the lever to the right, lift up the laptop's bottom cover gently and remove the cover from the laptop. While holding the lever to the right, lift up the laptop's bottom cover gently and remove the cover from the laptop.

Schritt 3  ¶ 

  • Locate the service access cover release lever and slide it to the right.

  • While holding the lever to the right, lift up the laptop's bottom cover gently and remove the cover from the laptop.

Schritt 4  ¶ 

If you are performing any installations after the battery, orient the computer so that the underside is up, and the battery port is facing away from you.

Schritt 4  ¶ 

  • If you are performing any installations after the battery, orient the computer so that the underside is up, and the battery port is facing away from you.