Zum Hauptinhalt wechseln
Hilfe

iPad Mini CDMA Battery Connector Replacement

Nicht eigenständige Anleitung

Nicht eigenständige Anleitung

Bitte beachte, dass diese Anleitung nur eine grundständige Anleitung für andere Anleitungen ist.

Prereq for disconnecting battery.

Prereq for disconnecting battery.

Schritt 1 Battery Connector  ¶ 

Remove the three 1.3 mm Phillips #00 screws securing the connector shield to the logic board.

Schritt 1 Battery Connector  ¶ 

  • Remove the three 1.3 mm Phillips #00 screws securing the connector shield to the logic board.

  • Be sure to not substitute these three screws with any other screws, specifically the screws securing the LCD shield plate to the rear case of the iPad. Any slightly longer screws may strip the screw holes and result in irreparable damage to the logic board.

Schritt 2  ¶ 

Use a pair of tweezers to grasp and remove the connector shield from the iPad.

Schritt 2  ¶ 

  • Use a pair of tweezers to grasp and remove the connector shield from the iPad.

Schritt 3  ¶ 

Use a plastic opening tool to gently pry the battery connector up from its socket on the logic board. Be very careful to only pry up on the battery connector and not on the socket itself. If you pry up on the logic board socket, you may break the connector entirely.

Schritt 3  ¶ 

  • Use a plastic opening tool to gently pry the battery connector up from its socket on the logic board.

  • Be very careful to only pry up on the battery connector and not on the socket itself. If you pry up on the logic board socket, you may break the connector entirely.