Zum Hauptinhalt wechseln
Hilfe

HTC Thunderbolt LCD/Screen Replacement

Action Shots

Action Shots

Sei ein Actionheld! Diese Anleitung benötigt Bilder, damit besser veranschaulicht werden kann, wie bestimmte Handgriffe ausgeführt werden.

Bessere Einleitung

Bessere Einleitung

Verbessere diese Anleitung, indem du die Einleitung vervollständigst oder überarbeitest.

Use this guide to replace the LCD on the HTC Thunderbolt.

Abschnitte

Schritt 1 LCD/Screen  ¶ 

Using the tip of an plastic opening tool flip up the tab holding the capacitive button ribbon cable. Be careful opening these tabs as they are very easy to break.

Schritt 1 LCD/Screen  ¶ 

  • Using the tip of an plastic opening tool flip up the tab holding the capacitive button ribbon cable.

  • Be careful opening these tabs as they are very easy to break.

  • Use a pair of tweezers to pull the capacitive button cable out of its socket.

Schritt 2  ¶ 

Lifting from the side where the ribbon was disconnected, flip over the motherboard. Remove the black tape covering the tabs connecting the motherboard and LCD.

Schritt 2  ¶ 

  • Lifting from the side where the ribbon was disconnected, flip over the motherboard.

  • Remove the black tape covering the tabs connecting the motherboard and LCD.

Schritt 3  ¶ 

Using the plastic opening tool pop up  the two tabs connecting the LCD and motherboard.

Schritt 3  ¶ 

  • Using the plastic opening tool pop up the two tabs connecting the LCD and motherboard.

Schritt 4  ¶ 

Once the tabs have been popped up, slowly pull the two pieces away from each other. If there is resistance pulling apart the phone then a ribbon or tab has not been disconnected properly/completely.

Schritt 4  ¶ 

  • Once the tabs have been popped up, slowly pull the two pieces away from each other.

  • If there is resistance pulling apart the phone then a ribbon or tab has not been disconnected properly/completely.