Zum Hauptinhalt wechseln
Hilfe

Game Boy Color Power LED Replacement

Empfohlene Anleitung von Studenten

Empfohlene Anleitung von Studenten

Diese Anleitung ist das Werk unserer herausragenden Studenten und wird von den iFixit-Mitarbeitern als außergewöhnlich gut eingestuft.

Empfohlene Anleitung

Empfohlene Anleitung

Diese Anleitung wird von den iFixit-Mitarbeitern als außergewöhnlich gut eingestuft.

This guide shows you how to repair the Game Boy Color's power LED.

  • Autor: Alex Wu
  • Geschätzte Zeit: 15 - 30 Minuten
  • Schwierigkeitsgrad: Schwierig

This guide will show you how to repair the Game Boy Color's power LED. The power led glows red when the device is turned on indicating that it is receiving power.

Abschnitte
Werkzeuge

Schritt 1 Power LED  ¶ 

Unsolder and remove the LED from the circuit board. Click here for a guide on how to solder and unsolder

Schritt 1 Power LED  ¶ 

Schritt 2  ¶ 

Insert new LED into the circuit board.

Schritt 2  ¶ 

  • Insert new LED into the circuit board.

  • Make sure that the LED is in the correct orientation. The longer leg of the LED is the positive end, while the shorter leg is the negative end.

  • The positive lead should go through the hole closest to the edge of the circuit board.

Schritt 3  ¶ 

Solder the leads of the new LED to the circuit board.

Schritt 3  ¶ 

  • Solder the leads of the new LED to the circuit board.

Schritt 4  ¶ 

Cut the excess ends of the LED legs using the wire cutters.

Schritt 4  ¶ 

  • Cut the excess ends of the LED legs using the wire cutters.