Zum Hauptinhalt wechseln
Hilfe

Toshiba Satellite E105-S1602 Front Panel Replacement

Benötigt Bessere Bilder

Benötigt Bessere Bilder

Schönere Fotos werden diese Anleitung verbessern. Trage dazu bei, indem du die Alten bearbeitest oder Neue aufnimmst und hochlädst!

Bessere Einleitung

Bessere Einleitung

Verbessere diese Anleitung, indem du die Einleitung vervollständigst oder überarbeitest.

Use this guide to replace/remove the front panel. Prerequisite to removing the front panel for more detailed work.

The front panel may need to be replaced if your track pad is not working. However, this guide is very important as it can be found in nearly every other guide. Removing the front panel is how you get to most of the other parts of the device.

Abschnitte
Werkzeuge

Schritt 1 Front Panel  ¶ 

Locate the four silver screws on the front panel. Using the Phillips #0, unscrew to remove all four 2.95mm silver screws.

Schritt 1 Front Panel  ¶ 

  • Locate the four silver screws on the front panel.

  • Using the Phillips #0, unscrew to remove all four 2.95mm silver screws.

Schritt 2  ¶ 

Flip the laptop over and locate all seven screws on the bottom of the laptop. Unscrew all seven Philips#00 7.70mm screws.

Schritt 2  ¶ 

  • Flip the laptop over and locate all seven screws on the bottom of the laptop.

  • Unscrew all seven Philips#00 7.70mm screws.

Schritt 3  ¶ 

Locate and unscrew the three silver Philips #00 2.85mm screws inside the battery compartment. Locate and unscrew the five black Philips #00 3.25mm screws inside the battery compartment.

Schritt 3  ¶ 

  • Locate and unscrew the three silver Philips #00 2.85mm screws inside the battery compartment.

  • Locate and unscrew the five black Philips #00 3.25mm screws inside the battery compartment.

Schritt 4  ¶ 

Rotate the laptop so the back faces you. Locate the two black Philips #00 7.65 screws, one by each hinge, and remove.

Schritt 4  ¶ 

  • Rotate the laptop so the back faces you.

  • Locate the two black Philips #00 7.65 screws, one by each hinge, and remove.

Schritt 5  ¶ 

Use the plastic opening tool to pry the top panel up from the base of the computer. Slowly work your way around the computer with the plastic removing tool to make it easier to lift the top panel away from the base. Carefully lift the top panel no more than six inches, as there are ribbon cables connecting the two pieces.

Schritt 5  ¶ 

  • Use the plastic opening tool to pry the top panel up from the base of the computer.

  • Slowly work your way around the computer with the plastic removing tool to make it easier to lift the top panel away from the base.

  • Carefully lift the top panel no more than six inches, as there are ribbon cables connecting the two pieces.

  • Disconnect ribbons, and slowly lift the top panel up, away from the base.

Schritt 6  ¶ 

Locate the ribbon cable from the motherboard. Using plastic removing tools, pop the ribbon base from the motherboard.

Schritt 6  ¶ 

  • Locate the ribbon cable from the motherboard.

  • Using plastic removing tools, pop the ribbon base from the motherboard.

Schritt 7  ¶ 

Locate the two plugs from the motherboard. Using plastic opening tools, remove each plug from the motherboard.

Schritt 7  ¶ 

  • Locate the two plugs from the motherboard.

  • Using plastic opening tools, remove each plug from the motherboard.

Schritt 8  ¶ 

Locate the ribbon cable partially hidden under the front panel. Using plastic opening tools, pop out the ribbon cable from the motherboard.

Schritt 8  ¶ 

  • Locate the ribbon cable partially hidden under the front panel.

  • Using plastic opening tools, pop out the ribbon cable from the motherboard.

Schritt 9  ¶ 

Make sure that all wires have been disconnected before proceeding to avoid damaging components.

Schritt 9  ¶ 

  • Make sure that all wires have been disconnected before proceeding to avoid damaging components.

  • Slowly lift the top panel away from the base of the computer.

  • Place the top panel away from the computer and keep in a flat non-metallic surface until needed.