Zum Hauptinhalt wechseln
Hilfe

Disassembling Epson PPC650 Camera Casing

Aufzählungszeichen!

Aufzählungszeichen!

Ein verbesserter Einsatz von Markups und der Farbe bzw. Art von Aufzählungszeichen würde diese Anleitung verständlicher machen.

In Bearbeitung

In Bearbeitung

Diese Anleitung ist noch in Bearbeitung. Aktualisiere regelmäßig, um die neuesten Änderungen zu sehen!

Fehler in den Markups

Fehler in den Markups

Diese Anleitung benötigt bessere Markups. Hilf aus, indem du sie korrigierst oder einige Markup-Anmerkungen erstellst.

Bessere Einleitung

Bessere Einleitung

Verbessere diese Anleitung, indem du die Einleitung vervollständigst oder überarbeitest.

Disassembling the camera casing to access the viewing screen

  • Autor: Brittany
  • Schwierigkeitsgrad: Moderat

Schritt 1 Disassembling Epson PPC650 Camera Casing  ¶ 

Make sure the camera is turned off here. Remove batteries from the battery compartment located on the bottom of the camera Remove SD card for the card reader compartment located on the flat side (left side)  of the camera

Schritt 1 Disassembling Epson PPC650 Camera Casing  ¶ 

  • Make sure the camera is turned off here.

  • Remove batteries from the battery compartment located on the bottom of the camera

  • Remove SD card for the card reader compartment located on the flat side (left side) of the camera

Schritt 2  ¶ 

Remove 2 screws on the rounded side of the camera wisdom here.

Schritt 2  ¶ 

  • Remove 2 screws on the rounded side of the camera wisdom here.

Schritt 3  ¶ 

Remove 3 screws on the flat side of the camera All silver screws go into the side of the camera that is silver

Schritt 3  ¶ 

  • Remove 3 screws on the flat side of the camera

  • All silver screws go into the side of the camera that is silver

  • All black screws go into the side of the camera that is black

Schritt 4  ¶ 

Remove 4 screws from the bottom of the camera

Schritt 4  ¶ 

  • Remove 4 screws from the bottom of the camera

  • All silver screws go into the side of the camera that is silver

  • All black screws go into the side of the camera that is black

Schritt 5  ¶ 

Separate the front and back pieces of the cameras plastic casing using a spudgerm here. WARNING: When pulling the front plastic casing, be careful of the wire that are connected to the aperture control Use minimal force so that the plastic casing does not break

Schritt 5  ¶ 

  • Separate the front and back pieces of the cameras plastic casing using a spudgerm here.

  • WARNING: When pulling the front plastic casing, be careful of the wire that are connected to the aperture control

  • Use minimal force so that the plastic casing does not break

  • When separating the small silver sliding indicator for view/off/playback may fall out

  • The plastic viewing window located on the top of the camera may also become lose and fall out