Zum Hauptinhalt wechseln
Hilfe

IBM Thinkpad T60 Palm Rest Replacement

Aufzählungszeichen!

Aufzählungszeichen!

Ein verbesserter Einsatz von Markups und der Farbe bzw. Art von Aufzählungszeichen würde diese Anleitung verständlicher machen.

Benötigt Mehr Bilder

Benötigt Mehr Bilder

Einige Bilder mehr würden die Vorgehensweise in dieser Anleitung deutlich klarer machen.

This guide will show how to remove the palm rest. In addition, this guide will act as a prerequisite guide for the following guides.

  • Autor: Dylan Kratochvil
  • Geschätzte Zeit: 5 - 10 Minuten
  • Schwierigkeitsgrad: Einfach

Always power down the computer before attempting any installation/removal of any hardware components. Be sure to remove the AC adapter and all cables from the computer. If the computer has been on, wait several minutes before beginning the procedure to ensure all parts have cooled down.

Abschnitte
Werkzeuge

Schritt 1 Palm Rest  ¶ 

Using a #0 Phillips screwdriver, remove the four 17.0 mm screws. Using a #0 Phillips screwdriver, remove the four 17.0 mm screws.

Schritt 1 Palm Rest  ¶ 

  • Using a #0 Phillips screwdriver, remove the four 17.0 mm screws.

Schritt 2  ¶ 

Turn the computer back over, so the keyboard is facing upwards.

Schritt 2  ¶ 

  • Turn the computer back over, so the keyboard is facing upwards.

  • Open the display to access the palm rest. Apply pressure to the sides of the palm rest so that it bends upwards in the middle. Gently lift away from the computer.

Schritt 3  ¶ 

Slightly lift the palm rest away from the computer. The touchpad's data cable connects the palm rest to the base unit. BE CAREUL!

Schritt 3  ¶ 

  • Slightly lift the palm rest away from the computer.

  • The touchpad's data cable connects the palm rest to the base unit. BE CAREUL!

  • Detach the connector by pulling upwards on the white tab.