Zum Hauptinhalt wechseln
Hilfe

Sanyo Katana Camera Replacement

Replacing the camera in the front of the phone.

  • Autor: Preston
  • Geschätzte Zeit: 5 - 10 Minuten
  • Schwierigkeitsgrad: Moderat

This guide removes the camera after reaching it by removing the screen and front case of the phone. Though the casing can be difficult to remove, the camera itself requires minimal effort to replace.

Abschnitte
Werkzeuge

Schritt 1 Camera  ¶ 

Use a Tri-wing Y0 screwdriver to remove the 4.4mm screw. Use fingers to remove the strip. Use fingers to remove the strip.

Schritt 1 Camera  ¶ 

  • Use a Tri-wing Y0 screwdriver to remove the 4.4mm screw.

  • Use fingers to remove the strip.

Schritt 2  ¶ 

Detach the ribbon connections underneath the green connector strip and remove them from the device.  This will reveal the camera. Detach the ribbon connections underneath the green connector strip and remove them from the device.  This will reveal the camera. Detach the ribbon connections underneath the green connector strip and remove them from the device.  This will reveal the camera.

Schritt 2  ¶ 

  • Detach the ribbon connections underneath the green connector strip and remove them from the device. This will reveal the camera.

Schritt 3  ¶ 

Using a spudger, remove the ribbon connection of the camera from the adhesive that attaches it to the device. Grab the camera using fingers and remove it from the phone case. Grab the camera using fingers and remove it from the phone case.

Schritt 3  ¶ 

  • Using a spudger, remove the ribbon connection of the camera from the adhesive that attaches it to the device.

  • Grab the camera using fingers and remove it from the phone case.