Zum Hauptinhalt wechseln
Hilfe

Fujifilm Finepix F10 6.3 MP LCD Replacement

Install a new LCD to replace an old or broken one.

  • Autor: Sarah Looper
  • Geschätzte Zeit: 10 Minuten
  • Schwierigkeitsgrad: Moderat

A guide on how to take out the many screws located on the inside, metal cover and how to install an LCD.

Relevante Ersatzteile

Schritt 1 LCD  ¶ 

Remove screws from the casing covering the LCD using the Phillips 00 screwdriver.

Schritt 1 LCD  ¶ 

  • Remove screws from the casing covering the LCD using the Phillips 00 screwdriver.

  • Remove the fifteen 2.9 mm Phillips #00 screws.

Schritt 2  ¶ 

Slide casing out using the spudger.

Schritt 2  ¶ 

  • Slide casing out using the spudger.

Schritt 3  ¶ 

Gently remove the LCD display data cable by gripping the end that is connected to the motherboard and pulling out. Gently remove the LCD display data cable by gripping the end that is connected to the motherboard and pulling out.

Schritt 3  ¶ 

  • Gently remove the LCD display data cable by gripping the end that is connected to the motherboard and pulling out.