Zum Hauptinhalt wechseln
Hilfe

Nikon Coolpix S630 Back Cover Replacement

Action Shots

Action Shots

Sei ein Actionheld! Diese Anleitung benötigt Bilder, damit besser veranschaulicht werden kann, wie bestimmte Handgriffe ausgeführt werden.

This guide will show you how to safely take off the back panel of your Nikon Coolpix S630.

  • Autor: Anna Katrina
  • Geschätzte Zeit: 5 Minuten
  • Schwierigkeitsgrad: Einfach

This guide will show you the proper steps to take apart the back metal casing from your Nikon Coolpix S639.

Abschnitte
Werkzeuge

Schritt 1 Back Cover Removal  ¶ 

Unscrew the two 3.5mm Phillips screws from the side with the AV outlet. Unscrew the 3.5mm Phillips screw from the opposite side of the camera. Unscrew the six 3.5mm Phillips screws from the bottom of the camera.

Schritt 1 Back Cover Removal  ¶ 

  • Unscrew the two 3.5mm Phillips screws from the side with the AV outlet.

  • Unscrew the 3.5mm Phillips screw from the opposite side of the camera.

  • Unscrew the six 3.5mm Phillips screws from the bottom of the camera.

Schritt 2  ¶ 

Carefully remove the back casing from the camera.

Schritt 2  ¶ 

  • Carefully remove the back casing from the camera.

  • Be mindful when removing the back casing as there is a ribbon that still connects the back casing to the motherboard.

Schritt 3 Detaching Ribbon  ¶ 

Place the plastic opening tool underneath the ribbon tab as shown. Gently lift the tab up. Gently pull the ribbon from the logic board with tweezers.

Schritt 3 Detaching Ribbon  ¶ 

  • Place the plastic opening tool underneath the ribbon tab as shown. Gently lift the tab up.

  • Gently pull the ribbon from the logic board with tweezers.

  • With the ribbon disconnected, the back casing should now be detached from the rest of the camera.