Zum Hauptinhalt wechseln
Hilfe

India Mark III Head Replacement

Replace the head of the India Mark III, or remove it for cleaning.

Follow this guide to remove the head of the India Mark III. You can then replace it or clean it, as necessary.

Abschnitte

Schritt 1 Head  ¶ 

Remove the two bolts from the handle side of the pump head. Use one wrench on the bolt and another on the nut beneath. Hold the bolt stationary and loosen the nut. Use one wrench on the bolt and another on the nut beneath. Hold the bolt stationary and loosen the nut.

Schritt 1 Head  ¶ 

  • Remove the two bolts from the handle side of the pump head.

  • Use one wrench on the bolt and another on the nut beneath. Hold the bolt stationary and loosen the nut.

Schritt 2  ¶ 

Remove the two bolts and nuts from the handle side. Remove the two bolts and nuts from the handle side. Remove the two bolts and nuts from the handle side.

Schritt 2  ¶ 

  • Remove the two bolts and nuts from the handle side.

Schritt 3  ¶ 

After removing the two handle side bolts, have your partner support the weight of the handle. Remove the two remaining bolts in the same fashion.

Schritt 3  ¶ 

  • After removing the two handle side bolts, have your partner support the weight of the handle.

  • Remove the two remaining bolts in the same fashion.

Schritt 4  ¶ 

Lift and remove the pump head from the pump. Store the pump head in a sanitary place, preferably above ground, to prevent contamination. Store the pump head in a sanitary place, preferably above ground, to prevent contamination.

Schritt 4  ¶ 

  • Lift and remove the pump head from the pump.

  • Store the pump head in a sanitary place, preferably above ground, to prevent contamination.