Zum Hauptinhalt wechseln
Hilfe

Power Mac G4 MDD AirPort Card Replacement

  • Autor: Chris Green
  • Geschätzte Zeit: 5 - 10 Minuten
  • Schwierigkeitsgrad: Einfach

The Power Mac G4 Uses the standard PCMCIA AirPort card found in Macs from 1999-2004.

*The Firewire 800 Model uses an AirPort Extreme Card found in iBook G4's And 1Ghz+ iMac G4's.*

Abschnitte
Relevante Ersatzteile

Schritt 1 AirPort Card  ¶ 

The AirPort card is located next to the graphics card. If your computer has a FireWire 800 port between the FireWire 400 Ports and the Ethernet Ports then your computer uses an AirPort Extreme 802.11g Card (See Related Parts). If your computer has no firewire 800 port, then your computer uses an 802.11b AirPort PCMCIA Card (Also See Related Parts). Removal of both cards is pretty much the same. First disconnect the antenna from the card, it may be helpful to use a spudger or flathead screwdriver.

Schritt 1 AirPort Card  ¶ 

  • The AirPort card is located next to the graphics card.

  • If your computer has a FireWire 800 port between the FireWire 400 Ports and the Ethernet Ports then your computer uses an AirPort Extreme 802.11g Card (See Related Parts). If your computer has no firewire 800 port, then your computer uses an 802.11b AirPort PCMCIA Card (Also See Related Parts). Removal of both cards is pretty much the same.

  • First disconnect the antenna from the card, it may be helpful to use a spudger or flathead screwdriver.

  • Now, grasp the plastic tab on the back of the card and pull it out of the computer.

Schritt 2  ¶ 

The Airport 802.11b PCMCIA Card.

Schritt 2  ¶ 

  • The Airport 802.11b PCMCIA Card.