Zum Hauptinhalt wechseln
Hilfe

Samsung Galaxy S4 Midframe Replacement

Replace the midframe in a Samsung Galaxy S4.

  • Autor: Sam Lionheart
  • Geschätzte Zeit: 5 - 10 Minuten
  • Schwierigkeitsgrad: Einfach

Use this guide to replace the midframe of your Samsung Galaxy S4.

Abschnitte

Schritt 1 Midframe  ¶ 

Remove the nine 4.0 mm Phillips #00 screws securing the midframe to the display assembly.

Schritt 1 Midframe  ¶ 

  • Remove the nine 4.0 mm Phillips #00 screws securing the midframe to the display assembly.

Schritt 2  ¶ 

The midframe is secured to the display assembly by several plastic clips behind the chrome bezel of the midframe. The next few steps will guide you through separating the clips to free the midframe. Starting on the volume button side of the phone, insert your plastic opening tool between the chrome bezel around the display glass and the larger chrome border piece.  Look for the seam between the two.

Schritt 2  ¶ 

  • The midframe is secured to the display assembly by several plastic clips behind the chrome bezel of the midframe. The next few steps will guide you through separating the clips to free the midframe.

  • Starting on the volume button side of the phone, insert your plastic opening tool between the chrome bezel around the display glass and the larger chrome border piece. Look for the seam between the two.

  • Slide the opening tool along the seam, separating the plastic clips as you go.

  • Be very gentle whilst prying, and pry only enough to separate the plastic clips—there are several thin points in the midframe bezel that may crack if you bend them too much.

Schritt 3  ¶ 

Continue prying around the corner of the phone. Slide your opening tool along the seam between the midframe and display along the bottom of the device, releasing more of the plastic clips.

Schritt 3  ¶ 

  • Continue prying around the corner of the phone.

  • Slide your opening tool along the seam between the midframe and display along the bottom of the device, releasing more of the plastic clips.

Schritt 4  ¶ 

Again, pry around the corner, to the power button side. Slide the opening tool along the seam.

Schritt 4  ¶ 

  • Again, pry around the corner, to the power button side.

  • Slide the opening tool along the seam.

Schritt 5  ¶ 

Continue sliding the opening tool around the top of the phone, releasing the last of the clips and freeing the midframe from the display assembly. At this point, you may want to run your plastic opening tool along the entire perimeter of the device again, to make sure you've released all of the plastic clips.

Schritt 5  ¶ 

  • Continue sliding the opening tool around the top of the phone, releasing the last of the clips and freeing the midframe from the display assembly.

  • At this point, you may want to run your plastic opening tool along the entire perimeter of the device again, to make sure you've released all of the plastic clips.

Schritt 6  ¶ 

Remove the midframe from the display assembly. Remove the midframe from the display assembly. Remove the midframe from the display assembly.

Schritt 6  ¶ 

  • Remove the midframe from the display assembly.