Zum Hauptinhalt wechseln
Hilfe

Ricoh YF-20 Super Front Cover Replacement

Aufzählungszeichen!

Aufzählungszeichen!

Ein verbesserter Einsatz von Markups und der Farbe bzw. Art von Aufzählungszeichen würde diese Anleitung verständlicher machen.

Fehler in den Markups

Fehler in den Markups

Diese Anleitung benötigt bessere Markups. Hilf aus, indem du sie korrigierst oder einige Markup-Anmerkungen erstellst.

Benötigt Mehr Bilder

Benötigt Mehr Bilder

Einige Bilder mehr würden die Vorgehensweise in dieser Anleitung deutlich klarer machen.

This guide shows how to remove the Ricoh YF-20 Super camera front cover.

  • Autor: Eric Dazet
  • Geschätzte Zeit: 6 - 8 Minuten
  • Schwierigkeitsgrad: Moderat

This process involves removing the back cover and the front cover of the camera.

Schritt 1 Front Cover  ¶ 

Unscrew the seven indicated screws from the left, right, bottom, and back sides of the camera. Unscrew the seven indicated screws from the left, right, bottom, and back sides of the camera.

Schritt 1 Front Cover  ¶ 

  • Unscrew the seven indicated screws from the left, right, bottom, and back sides of the camera.

Schritt 2  ¶ 

Loosen the back cover from both the left and the right sides of the camera. Remove back cover. The lid of the battery compartment may fall off because it is not attached to anything. Remove back cover. The lid of the battery compartment may fall off because it is not attached to anything.

Schritt 2  ¶ 

  • Loosen the back cover from both the left and the right sides of the camera.

  • Remove back cover. The lid of the battery compartment may fall off because it is not attached to anything.

Schritt 3  ¶ 

Open the film compartment. Press your finger on top of the grey latch on the left side of the camera. Press your finger on top of the grey latch on the left side of the camera.

Schritt 3  ¶ 

  • Open the film compartment.

  • Press your finger on top of the grey latch on the left side of the camera.

Schritt 4  ¶ 

Removing the film compartment door is optional. However, it may aid maneuverability in future steps. Use a thin object like a toothpick or a small screwdriver to push down on the metal pin holding the film compartment door in place. Use your fingers to completely remove the metal pin.

Schritt 4  ¶ 

  • Removing the film compartment door is optional. However, it may aid maneuverability in future steps.

  • Use a thin object like a toothpick or a small screwdriver to push down on the metal pin holding the film compartment door in place.

  • Use your fingers to completely remove the metal pin.

  • Remove the film compartment door.

Schritt 5  ¶ 

Using a thin shaft screwdriver, unscrew the two indicated screws within the film compartment. Using a thin shaft screwdriver, unscrew the two indicated screws within the film compartment.

Schritt 5  ¶ 

  • Using a thin shaft screwdriver, unscrew the two indicated screws within the film compartment.

Schritt 6  ¶ 

Loosen the front cover from the left and right sides of the camera. Remove the front cover. Remove the front cover.

Schritt 6  ¶ 

  • Loosen the front cover from the left and right sides of the camera.

  • Remove the front cover.