Zum Hauptinhalt wechseln
Hilfe

iMac Intel 21.5" EMC 2308 Bluetooth Board Replacement

Use this guide to replace a broken Bluetooth board.

Abschnitte
Werkzeuge

Schritt 1 Bluetooth Board  ¶ 

Use the flat end of a spudger to pry the Bluetooth antenna cable connector up off the Bluetooth board.

Schritt 1 Bluetooth Board  ¶ 

  • Use the flat end of a spudger to pry the Bluetooth antenna cable connector up off the Bluetooth board.

Schritt 2  ¶ 

Remove the single 6.6 mm T8 Torx screw securing the Bluetooth board to the outer case.

Schritt 2  ¶ 

  • Remove the single 6.6 mm T8 Torx screw securing the Bluetooth board to the outer case.

Schritt 3  ¶ 

Disconnect the Bluetooth cable by pulling its connector away from the socket on the Bluetooth board.

Schritt 3  ¶ 

  • Disconnect the Bluetooth cable by pulling its connector away from the socket on the Bluetooth board.