Zum Hauptinhalt wechseln
Hilfe

LG Cosmos 2 Option Buttons Replacement

Uneinheitliche Bilder

Uneinheitliche Bilder

Eine Anpassung der Bilder dieser Anleitung an die Bilder der grundständigen Anleitungen würde die Qualität deutlich verbessern.

Falsche Werkzeuge

Falsche Werkzeuge

Hilf dabei, diese Anleitung zu verbessern, indem du die richtigen Werkzeuge auf den Bildern oder im Text verwendest.

Bessere Einleitung

Bessere Einleitung

Verbessere diese Anleitung, indem du die Einleitung vervollständigst oder überarbeitest.

The option buttons located on the side of the phone are very easy to replace.

  • Autor: Nick White
  • Geschätzte Zeit: 30 - 45 Minuten
  • Schwierigkeitsgrad: Moderat

Most of the LG Cosmos 2 must be disassembled prior to replacing the buttons. Follow these steps to complete this task.

Abschnitte

Schritt 1 Option Buttons  ¶ 

Use a screwdriver and corresponding bit to remove the four 1mm screws. Set the screws aside.

Schritt 1 Option Buttons  ¶ 

  • Use a screwdriver and corresponding bit to remove the four 1mm screws. Set the screws aside.

Schritt 2  ¶ 

Pull the ribbon cable through the slit in the keyboard case to separate it from the sliding mechanism. Pull the ribbon cable through the slit in the keyboard case to separate it from the sliding mechanism.

Schritt 2  ¶ 

  • Pull the ribbon cable through the slit in the keyboard case to separate it from the sliding mechanism.

Schritt 3  ¶ 

Use a screwdriver and corresponding bit to remove the four 3mm screws. Set the screws aside.

Schritt 3  ¶ 

  • Use a screwdriver and corresponding bit to remove the four 3mm screws. Set the screws aside.

  • Note: Two of the screws may be hidden underneath a black rubber film. Pull off this film if necessary.

Schritt 4  ¶ 

Use the plastic opener to pry open the front of the phone. Slip the ribbon cable through the slit to fully separate the two pieces.

Schritt 4  ¶ 

  • Use the plastic opener to pry open the front of the phone.

  • Slip the ribbon cable through the slit to fully separate the two pieces.

Schritt 5  ¶ 

Use a screwdriver and corresponding bit to remove the two 1mm screws. Set the screws aside.

Schritt 5  ¶ 

  • Use a screwdriver and corresponding bit to remove the two 1mm screws. Set the screws aside.

Schritt 6  ¶ 

Detach the ribbon cable with the plastic opener.

Schritt 6  ¶ 

  • Detach the ribbon cable with the plastic opener.

Schritt 7  ¶ 

Use the spudger to pry the metal piece loose. Remove the metal piece along with the two ribbon cables. Remove the metal piece along with the two ribbon cables.

Schritt 7  ¶ 

  • Use the spudger to pry the metal piece loose.

  • Remove the metal piece along with the two ribbon cables.

Schritt 8  ¶ 

Flip the front of the phone over and the old option buttons will fall out.

Schritt 8  ¶ 

  • Flip the front of the phone over and the old option buttons will fall out.

  • Insert new option buttons.