Zum Hauptinhalt wechseln
Hilfe

Sony Ericsson Xperia X10 Camera Replacement

In Bearbeitung

In Bearbeitung

Diese Anleitung ist noch in Bearbeitung. Aktualisiere regelmäßig, um die neuesten Änderungen zu sehen!

Anleitung eines Mitglieds

Anleitung eines Mitglieds

Ein großartiges Mitglied unserer Community hat diese Anleitung erstellt. Sie wird nicht von iFixit Mitarbeitern überprüft.

User should be able to disassemble phone, locate camera component if necessary.

  • Autor: Bryan
  • Geschätzte Zeit: 15 Minuten
  • Schwierigkeitsgrad: Moderat

Schritt 1 Camera  ¶ 

To access the internal components, such as the camera, we need to flip the phone with the screen facing down. Once this is done remove the battery. To access the internal components, such as the camera, we need to flip the phone with the screen facing down. Once this is done remove the battery.

Schritt 1 Camera  ¶ 

  • To access the internal components, such as the camera, we need to flip the phone with the screen facing down. Once this is done remove the battery.

Schritt 2  ¶ 

Remove eight 5mm screws as shown in the image. Use a T-6 bit.

Schritt 2  ¶ 

  • Remove eight 5mm screws as shown in the image. Use a T-6 bit.

Schritt 3  ¶ 

Using a case opener, start on the bottom right side of the phone and undo clips located at the interior sides. Repeat this step for the left side.

Schritt 3  ¶ 

  • Using a case opener, start on the bottom right side of the phone and undo clips located at the interior sides. Repeat this step for the left side.

Schritt 4  ¶ 

Once the clips are undone the back casing should dislocate and reveal the internal components of the phone. Camera location is identified on the image.

Schritt 4  ¶ 

  • Once the clips are undone the back casing should dislocate and reveal the internal components of the phone. Camera location is identified on the image.

Schritt 5  ¶ 

To remove the internal case surrounding the camera, apply pressure on the left side of internal casing and using a flat head screw driver unlatch both clips on the right side of casing. Once lifted detach ribbon cable with flat head screwdriver. To remove the internal case surrounding the camera, apply pressure on the left side of internal casing and using a flat head screw driver unlatch both clips on the right side of casing. Once lifted detach ribbon cable with flat head screwdriver. To remove the internal case surrounding the camera, apply pressure on the left side of internal casing and using a flat head screw driver unlatch both clips on the right side of casing. Once lifted detach ribbon cable with flat head screwdriver.

Schritt 5  ¶ 

  • To remove the internal case surrounding the camera, apply pressure on the left side of internal casing and using a flat head screw driver unlatch both clips on the right side of casing. Once lifted detach ribbon cable with flat head screwdriver.

Schritt 6  ¶ 

Once the interior casing is removed, dislocate the hardware by unlatching clip at shown location. Once the interior casing is removed, dislocate the hardware by unlatching clip at shown location.

Schritt 6  ¶ 

  • Once the interior casing is removed, dislocate the hardware by unlatching clip at shown location.

Schritt 7  ¶ 

To remove damaged camera flip hardware so the lens of the camera is facing downwards and remove ribbon cable connecting camera to hardware.

Schritt 7  ¶ 

  • To remove damaged camera flip hardware so the lens of the camera is facing downwards and remove ribbon cable connecting camera to hardware.

Schritt 8  ¶ 

Once camera is removed, insert new functional camera part and reassemble

Schritt 8  ¶ 

  • Once camera is removed, insert new functional camera part and reassemble