Zum Hauptinhalt wechseln
Hilfe

Motorola Razr V3c Speaker (CDMA) Replacement

How to replace a Motorola Razr V3c speaker.

  • Autor: Joshua Ruehlig
  • Geschätzte Zeit: 10 Minuten
  • Schwierigkeitsgrad: Moderat

This guide will show you how to remove and replace the speaker for a Motorola V3c.

Schritt 1 Speaker (CDMA)  ¶ 

Unscrew the two screws in the back using the T6.

Schritt 1 Speaker (CDMA)  ¶ 

  • Unscrew the two screws in the back using the T6.

Schritt 2  ¶ 

Use the plastic opening tool to pop the bottom and the sides off the back casing.

Schritt 2  ¶ 

  • Use the plastic opening tool to pop the bottom and the sides off the back casing.

  • Be careful not to pull the back lower cover off too far as it is connected to the phone body by a ribbon.

Schritt 3  ¶ 

Peel off the connector between the motherboard and the body of the phone.

Schritt 3  ¶ 

  • Peel off the connector between the motherboard and the body of the phone.

Schritt 4  ¶ 

Pull out the two black rubber covers using tweezers. The second rubber cover is much harder to get out.

Schritt 4  ¶ 

  • Pull out the two black rubber covers using tweezers.

  • The second rubber cover is much harder to get out.

Schritt 5  ¶ 

Pull out the white plastic cover by unclipping the two plastic pieces shown. Pull out the white plastic cover by unclipping the two plastic pieces shown.

Schritt 5  ¶ 

  • Pull out the white plastic cover by unclipping the two plastic pieces shown.

Schritt 6  ¶ 

Pull out the speaker.

Schritt 6  ¶ 

  • Pull out the speaker.