Zum Hauptinhalt wechseln
Hilfe

HP Pavilion dv6-2158nr LCD Monitor Replacement

Fehler in den Markups

Fehler in den Markups

Diese Anleitung benötigt bessere Markups. Hilf aus, indem du sie korrigierst oder einige Markup-Anmerkungen erstellst.

Instructions for disassembly and removal of the LCD Monitor in the HP Pavilion dv6-2158nr.

  • Autor: Chad
  • Geschätzte Zeit: 20 - 40 Minuten
  • Schwierigkeitsgrad: Moderat

Before removing the LCD Monitor, follow these steps:

Shut down the computer

If unsure whether your computer is off or in hibernation, turn it on, and then shut down through the operating system.

Disconnect devices and power

Disconnect all external devices, plug-ins and power from the computer.

Abschnitte

Schritt 1 LCD Monitor  ¶ 

Remove the 3mm screw that secures the WLAN module to the computer. (The edge of the module opposite the slot rises away from the computer.) Remove the WLAN module by pulling it away from the slot at an angle. Disconnect the two WLAN antenna cables from the WLAN module.

Schritt 1 LCD Monitor  ¶ 

  • Remove the 3mm screw that secures the WLAN module to the computer. (The edge of the module opposite the slot rises away from the computer.)

  • Remove the WLAN module by pulling it away from the slot at an angle.

  • Disconnect the two WLAN antenna cables from the WLAN module.

Schritt 2  ¶ 

Disconnect the display panel cable by use pulling upward on cable tabs. Disconnect the webcam/microphone cable from the system board. Remove the WLAN antenna cables and the webcam/ microphone cable from the clips built into the top cover.

Schritt 2  ¶ 

  • Disconnect the display panel cable by use pulling upward on cable tabs.

  • Disconnect the webcam/microphone cable from the system board.

  • Remove the WLAN antenna cables and the webcam/ microphone cable from the clips built into the top cover.

Schritt 3  ¶ 

Remove the four Phillips 7mm screws that secure the display assembly to the computer. Lift the display assembly straight up and remove it.

Schritt 3  ¶ 

  • Remove the four Phillips 7mm screws that secure the display assembly to the computer.

  • Lift the display assembly straight up and remove it.

Schritt 4  ¶ 

Remove the two Phillips 5mm screws that secure the display hinge to the display panel. The screws are behind plastic stickers and are very easy to bend.

Schritt 4  ¶ 

  • Remove the two Phillips 5mm screws that secure the display hinge to the display panel.

  • The screws are behind plastic stickers and are very easy to bend.

  • Use a prying tool to flex the plastic around the monitor display to release the clips holding the display case together.

  • Use caution when using prying tool and avoid damaging bezel clips.

Schritt 5  ¶ 

Remove the display bezel to uncover the LCD display

Schritt 5  ¶ 

  • Remove the display bezel to uncover the LCD display

  • Remove eight screws that fasten the LCD display.

  • two Phillips PM2.5×5.0 screws from the top corners.

  • six Phillips M2.5×5.0 screws from the display hinges

Schritt 6  ¶ 

Flex the bottom of the display panel and release the display hinges Place the LCD Monitor next to the display panel by flipping it over the display hinges. Disconnect the display LED cable from the display panel cable and remove the display panel.

Schritt 6  ¶ 

  • Flex the bottom of the display panel and release the display hinges

  • Place the LCD Monitor next to the display panel by flipping it over the display hinges.

  • Disconnect the display LED cable from the display panel cable and remove the display panel.

Schritt 7  ¶ 

Using the Philips #1, Remove four 7mm screws from the LCD Monitor frame. There are two screws on each side of the LCD Monitor.

Schritt 7  ¶ 

  • Using the Philips #1, Remove four 7mm screws from the LCD Monitor frame.

  • There are two screws on each side of the LCD Monitor.

  • Remove the LCD Monitor from the frame.