Mercedes W123 Battery Ground Cable Replacement
The ground cable on the W123 battery is very important to effective operation of its electrical system. Corrosion over time will reduce its effectiveness. Replace it, and consider improving the ground with a larger cable at the same time.
- Autor: Nicolas Siemsen
- Geschätzte Zeit: 10 Minuten
- Schwierigkeitsgrad: Einfach
Bad grounds on the W123 can cause all sorts of issues, from hard starts, to erratic function of electrical components. One way to help reduce this issue is to replace the ground strap on your battery with a new one, and perhaps even one that is larger than the one from the factory.
Bette diese Anleitung ein
Wähle eine Größe und kopiere den nachfolgenden Code, um diese Anleitung als kleines Widget auf deiner Seite / in deinem Forum einzubetten.
Schritt 1 — Disconnect the battery ¶
Start by disconnecting both battery terminals, beginning with the negative (-) side, which travels just a few inches to a bolt attaching the other end to the car's body.
Schritt 2 — Remove the old ground cable ¶
Loosen and remove this 13mm bolt that holds the cable to the metal of the car's chassis.
Now remove the old ground cable.
Schritt 3 — Install the new cable ¶
You can see here that the new ground cable is substantially thicker. It is a 2 gage cable. The ends are also crimped better, protecting the inner wire from corrosion.
This cable is also a bit longer than the old one, giving some more wiggle room.
Schritt 4 ¶
Install the new ground cable, using the new captive bolt, and nut, that came with it.