Zum Hauptinhalt wechseln
Hilfe

Dell Latitude X300 Screen Replacement

Benötigt Bessere Bilder

Benötigt Bessere Bilder

Schönere Fotos werden diese Anleitung verbessern. Trage dazu bei, indem du die Alten bearbeitest oder Neue aufnimmst und hochlädst!

Bessere Einleitung

Bessere Einleitung

Verbessere diese Anleitung, indem du die Einleitung vervollständigst oder überarbeitest.

This will guide will explain the steps required to replace the Dell Latitude X300 screen.

  • Autor: Jacob
  • Schwierigkeitsgrad: Moderat

Schritt 1 Screen  ¶ 

Make sure the Dell Latitude X300 power is off.

Schritt 1 Screen  ¶ 

  • Make sure the Dell Latitude X300 power is off.

  • Remove the battery located on the bottom of the device by pushing in both clips.

Schritt 2  ¶ 

Remove rubber caps on each corner of the front screen with a pinch. Remove the 4 mm screws located on the front screen of the laptop.

Schritt 2  ¶ 

  • Remove rubber caps on each corner of the front screen with a pinch.

  • Remove the 4 mm screws located on the front screen of the laptop.

Schritt 3  ¶ 

Carefully, remove the screen casing using either your hands or a proper tool.

Schritt 3  ¶ 

  • Carefully, remove the screen casing using either your hands or a proper tool.

  • The casing is very flimsy, so extreme care is required.

Schritt 4  ¶ 

Remove the 4 mm screws on the bottom left and bottom right corner of the screen.

Schritt 4  ¶ 

  • Remove the 4 mm screws on the bottom left and bottom right corner of the screen.

Schritt 5  ¶ 

Carefully lift the screen and place it on it's face. Disconnect the wiring attached to the screen.

Schritt 5  ¶ 

  • Carefully lift the screen and place it on it's face.

  • Disconnect the wiring attached to the screen.

  • It is important not to damage this wire.