Zum Hauptinhalt wechseln
Hilfe

Kodak EasyShare C713 Outer Case Replacement

Empfohlene Anleitung

Empfohlene Anleitung

Diese Anleitung wird von den iFixit-Mitarbeitern als außergewöhnlich gut eingestuft.

Replace the Outer Case in your Kodak EasyShare C713.

  • Autor: Taggart Ashby
  • Geschätzte Zeit: 5 - 10 Minuten
  • Schwierigkeitsgrad: Einfach

Use this guide to remove and replace front and back casing.

Abschnitte
Werkzeuge

Schritt 1 Outer Case  ¶ 

Remove 7 screws from the outer case with a Phillips #00. All screws are 4.45mm. There are 2 screws on the port side.

Schritt 1 Outer Case  ¶ 

  • Remove 7 screws from the outer case with a Phillips #00.

  • All screws are 4.45mm.

  • There are 2 screws on the port side.

  • There are 2 screws on starboard side.

  • There are 3 screws on the bottom.

Schritt 2  ¶ 

Make sure the battery cap is "up". Pull the outer case off with your hands. Pull the outer case off with your hands.

Schritt 2  ¶ 

  • Make sure the battery cap is "up".

  • Pull the outer case off with your hands.