Zum Hauptinhalt wechseln
Hilfe

Motorola Talkabout FV700R Battery Terminals Replacement

Benötigt Bessere Bilder

Benötigt Bessere Bilder

Schönere Fotos werden diese Anleitung verbessern. Trage dazu bei, indem du die Alten bearbeitest oder Neue aufnimmst und hochlädst!

This guide outlines the steps required to replace faulty battery terminals.

  • Autor: Kayla Brennan
  • Geschätzte Zeit: 5 - 15 Minuten
  • Schwierigkeitsgrad: Schwierig

The battery terminals are the contacts between the battery and the radio and guide the electricity from the battery to the radio. Without properly functioning battery terminals, power cannot be supplied to the radio. Follow the steps below to properly replace the battery terminals.

Abschnitte

Schritt 1 Battery Terminals  ¶ 

Now the circuit board can be removed from the back faceplate. To do this, grip the back faceplate in one hand and the antenna in the other. Pull and twist the antenna away from the back faceplate. The circuit board should be removed with the antenna, as they are attached. To do this, grip the back faceplate in one hand and the antenna in the other. Pull and twist the antenna away from the back faceplate. The circuit board should be removed with the antenna, as they are attached.

Schritt 1 Battery Terminals  ¶ 

  • Now the circuit board can be removed from the back faceplate.

  • To do this, grip the back faceplate in one hand and the antenna in the other. Pull and twist the antenna away from the back faceplate. The circuit board should be removed with the antenna, as they are attached.

Schritt 2  ¶ 

Once the circuit board is removed from the back plate of the radio, the battery terminals can be removed. From the front side of the two-way radio, use the flathead screwdriver to pry the longer battery terminals up and out of the radio. From the front side of the two-way radio, use the flathead screwdriver to pry the longer battery terminals up and out of the radio.

Schritt 2  ¶ 

  • Once the circuit board is removed from the back plate of the radio, the battery terminals can be removed.

  • From the front side of the two-way radio, use the flathead screwdriver to pry the longer battery terminals up and out of the radio.

Schritt 3  ¶ 

To remove the smaller batter terminals, you'll need to turn the radio back over to the back side. Use the flathead screwdriver to push on the terminal.

Schritt 3  ¶ 

  • To remove the smaller batter terminals, you'll need to turn the radio back over to the back side.

  • Use the flathead screwdriver to push on the terminal.

  • This may take some force.

  • Once the terminal is loose, you can turn the radio over and remove it with your hand.