Zum Hauptinhalt wechseln
Hilfe

Kodak EasyShare C713 LCD Replacement

Empfohlene Anleitung

Empfohlene Anleitung

Diese Anleitung wird von den iFixit-Mitarbeitern als außergewöhnlich gut eingestuft.

Replace the LCD in your Kodak EasyShare C713.

  • Autor: Taggart Ashby
  • Geschätzte Zeit: 20 Minuten
  • Schwierigkeitsgrad: Schwierig

Removing and replacing the LCD and LCD casing.

Abschnitte
Werkzeuge

Schritt 1 LCD  ¶ 

The LCD Screen is hinged at the bottom.

Schritt 1 LCD  ¶ 

  • The LCD Screen is hinged at the bottom.

  • Put your thumb in the upper right corner of the LCD Screen.

  • Pull the LCD screen out of it's outer case with your thumb.

Schritt 2  ¶ 

Remove the screw underneath LCD screen with the Phillips #00. The screw measures 4.1mm in length.

Schritt 2  ¶ 

  • Remove the screw underneath LCD screen with the Phillips #00. The screw measures 4.1mm in length.

Schritt 3  ¶ 

Desolder the two points. One on the port side.

Schritt 3  ¶ 

  • Desolder the two points.

  • One on the port side.

  • One on the bottom.

Schritt 4  ¶ 

After desoldering the LCD casing, just use your fingers to carefully remove it.

Schritt 4  ¶ 

  • After desoldering the LCD casing, just use your fingers to carefully remove it.

Schritt 5  ¶ 

Flip up the black tab on the bottom of the LCD Screen with a fingertip.

Schritt 5  ¶ 

  • Flip up the black tab on the bottom of the LCD Screen with a fingertip.

Schritt 6  ¶ 

Remove the LCD ribbon cable from inside the black tab.

Schritt 6  ¶ 

  • Remove the LCD ribbon cable from inside the black tab.