Zum Hauptinhalt wechseln
Hilfe

Kodak EasyShare C713 Lens Replacement

Falsche Werkzeuge

Falsche Werkzeuge

Hilf dabei, diese Anleitung zu verbessern, indem du die richtigen Werkzeuge auf den Bildern oder im Text verwendest.

Fehler in den Markups

Fehler in den Markups

Diese Anleitung benötigt bessere Markups. Hilf aus, indem du sie korrigierst oder einige Markup-Anmerkungen erstellst.

  • Autor: Taggart Ashby
  • Geschätzte Zeit: 25 Minuten
  • Schwierigkeitsgrad: Sehr schwierig

Removing and replacing the lens.

Abschnitte

Schritt 1 Lens  ¶ 

Using a fingertip, flip the black tab near the top of the camera.

Schritt 1 Lens  ¶ 

  • Using a fingertip, flip the black tab near the top of the camera.

  • Remove the ribbon connector from inside the black tab.

Schritt 2  ¶ 

Remove the remaining screws on the back with the Phillips #00.

Schritt 2  ¶ 

  • Remove the remaining screws on the back with the Phillips #00.

  • These 8 screws measure 4.1mm in length.

Schritt 3  ¶ 

Desolder the upper points.

Schritt 3  ¶ 

  • Desolder the upper points.

  • There is a large solder point in the upper right.

  • There is a series of solder points in a rectangular area in the upper middle of the camera.

Schritt 4  ¶ 

Turn the camera over.

Schritt 4  ¶ 

  • Turn the camera over.

  • Remove the battery cap screw.

  • It is silver and measures 2.2mm.

Schritt 5  ¶ 

Turn the camera over. Pry the capacitor out of its holder on the bottom of the camera. This can be done with your fingers.

Schritt 5  ¶ 

  • Turn the camera over.

  • Pry the capacitor out of its holder on the bottom of the camera. This can be done with your fingers.

Schritt 6  ¶ 

Remove the lens assembly with your fingers. You may need to wiggle it back and forth until it comes loose. Do not touch the marked areas. This will cause the camera to take blurry pictures.

Schritt 6  ¶ 

  • Remove the lens assembly with your fingers.

  • You may need to wiggle it back and forth until it comes loose.

  • Do not touch the marked areas. This will cause the camera to take blurry pictures.