Zum Hauptinhalt wechseln
Hilfe

Asus W2W-A1 Fan Replacement

Action Shots

Action Shots

Sei ein Actionheld! Diese Anleitung benötigt Bilder, damit besser veranschaulicht werden kann, wie bestimmte Handgriffe ausgeführt werden.

Benötigt Bessere Bilder

Benötigt Bessere Bilder

Schönere Fotos werden diese Anleitung verbessern. Trage dazu bei, indem du die Alten bearbeitest oder Neue aufnimmst und hochlädst!

Bessere Einleitung

Bessere Einleitung

Verbessere diese Anleitung, indem du die Einleitung vervollständigst oder überarbeitest.

Remove and replace the laptop fan.

  • Autor: Emily Mullins
  • Geschätzte Zeit: 45 Minuten
  • Schwierigkeitsgrad: Moderat
Abschnitte

Schritt 1 Fan  ¶ 

Remove the 3 4 mm Phillips head screws holding down the fan on inside of the laptop. Remove the 3 4 mm Phillips head screws holding down the fan on inside of the laptop.

Schritt 1 Fan  ¶ 

  • Remove the 3 4 mm Phillips head screws holding down the fan on inside of the laptop.

Schritt 2  ¶ 

Remove the 4 mm Phillips head screw holding the left panel on the back of the laptop.

Schritt 2  ¶ 

  • Remove the 4 mm Phillips head screw holding the left panel on the back of the laptop.

  • Slide off the left panel by pulling to the left.

Schritt 3  ¶ 

Remove the 4 4 mm Phillips screws on the orange cooling system. Remove the 4 4 mm Phillips screws on the orange cooling system.

Schritt 3  ¶ 

  • Remove the 4 4 mm Phillips screws on the orange cooling system.

Schritt 4  ¶ 

Gently lift the orange cooling system upward to remove it from the laptop.

Schritt 4  ¶ 

  • Gently lift the orange cooling system upward to remove it from the laptop.

Schritt 5  ¶ 

Disconnect the cable from its socket by pulling up on it gently. It will be revealed beneath the previously removed cooling system. Disconnect the cable from its socket by pulling up on it gently. It will be revealed beneath the previously removed cooling system.

Schritt 5  ¶ 

  • Disconnect the cable from its socket by pulling up on it gently. It will be revealed beneath the previously removed cooling system.

Schritt 6  ¶ 

From the front of the laptop, remove the tape holding down the fan's cable. Gently push down on the protective area around the fan as shown to pull the cable through the gap created.

Schritt 6  ¶ 

  • From the front of the laptop, remove the tape holding down the fan's cable.

  • Gently push down on the protective area around the fan as shown to pull the cable through the gap created.

  • Lift the fan out of the laptop.