Zum Hauptinhalt wechseln
Hilfe

Beats Studio First Generation Batteries Replacement

Empfohlene Anleitung von Studenten

Empfohlene Anleitung von Studenten

Diese Anleitung ist das Werk unserer herausragenden Studenten und wird von den iFixit-Mitarbeitern als außergewöhnlich gut eingestuft.

Unlike many other headphones, the Beats Studio are powered by batteries. The batteries provide the extra power needed for active noise cancellation.

  • Autor: Oscar
  • Geschätzte Zeit: 2 Minuten
  • Schwierigkeitsgrad: Sehr einfach

Don't worry, Dr. Dre is here! Changing the batteries is probably the easiest replacement procedure you can perform, so don't stress out and you'll be fine.

Schritt 1 Identify the Left Speaker Housing  ¶ 

The left speaker is the speaker that holds the batteries and does not have the power switch.

Schritt 1 Identify the Left Speaker Housing  ¶ 

  • The left speaker is the speaker that holds the batteries and does not have the power switch.

Schritt 2 Removing the Battery Cap  ¶ 

Place two fingers on each side of the cap. Press and twist counterclockwise to loosen the cap. Once the cap is loose, simply lift the cap out to reveal the batteries. Once the cap is loose, simply lift the cap out to reveal the batteries.

Schritt 2 Removing the Battery Cap  ¶ 

  • Place two fingers on each side of the cap. Press and twist counterclockwise to loosen the cap.

  • Once the cap is loose, simply lift the cap out to reveal the batteries.

Schritt 3 Batteries!  ¶ 

Carefully pull the batteries out of their housings. When putting in new batteries, make sure that you place each battery in the correct orientation.

Schritt 3 Batteries!  ¶ 

  • Carefully pull the batteries out of their housings. When putting in new batteries, make sure that you place each battery in the correct orientation.