Zum Hauptinhalt wechseln
Hilfe

Samsung Gear Fit Screen Replacement

This guide will cover removing and replacing the screen of the Samsung Gear Fit.

  • Autor: Nathan Powell
  • Geschätzte Zeit: 10 - 15 Minuten
  • Schwierigkeitsgrad: Einfach
Abschnitte
Werkzeuge

Schritt 1 Screen  ¶ 

Heating the device with a hair dryer may warp the screen or damage the device.  It it preferable to use an iOpener for this step.

Schritt 1 Screen  ¶ 

  • Heating the device with a hair dryer may warp the screen or damage the device. It it preferable to use an iOpener for this step.

  • For step-by-step instructions on using an iOpener, see the iOpener Anleitung.

  • Use a hair dryer, heat gun, or an iOpener to heat the Gear Fit for 1-2 minutes until it is hot to the touch.

Schritt 2  ¶ 

The screen is connected to the device by a ribbon cable on the left side with the power button facing you. Do not try to completely separate the screen from the device yet, and be careful. Gently pry the screen loose using a plastic opening tool. If the screen doesn't easily come loose, more heating may be required

Schritt 2  ¶ 

  • The screen is connected to the device by a ribbon cable on the left side with the power button facing you. Do not try to completely separate the screen from the device yet, and be careful.

  • Gently pry the screen loose using a plastic opening tool.

  • If the screen doesn't easily come loose, more heating may be required

Schritt 3  ¶ 

Using tweezers as a lever, pry the inner assembly out of the external casing. This will be harder than removing the screen.  Moderate force may be required. This will be harder than removing the screen.  Moderate force may be required.

Schritt 3  ¶ 

  • Using tweezers as a lever, pry the inner assembly out of the external casing.

  • This will be harder than removing the screen. Moderate force may be required.

Schritt 4  ¶ 

Disconnect the ribbon cables connecting the screen to the motherboard by lifting their metal connectors up off of the board with tweezers. Disconnect the ribbon cables connecting the screen to the motherboard by lifting their metal connectors up off of the board with tweezers. Disconnect the ribbon cables connecting the screen to the motherboard by lifting their metal connectors up off of the board with tweezers.

Schritt 4  ¶ 

  • Disconnect the ribbon cables connecting the screen to the motherboard by lifting their metal connectors up off of the board with tweezers.

Schritt 5  ¶ 

Gently peel the screen assembly up and away from the device using tweezers. Gently peel the screen assembly up and away from the device using tweezers.

Schritt 5  ¶ 

  • Gently peel the screen assembly up and away from the device using tweezers.