Zum Hauptinhalt wechseln
Hilfe

Sony Vaio PCG-6J2L screen Replacement

Fehlende Schritte

Fehlende Schritte

Ups! In dieser Anleitung fehlen momentan einige wichtige Schritte.

Falsche Werkzeuge

Falsche Werkzeuge

Hilf dabei, diese Anleitung zu verbessern, indem du die richtigen Werkzeuge auf den Bildern oder im Text verwendest.

Please try our Troubleshooting Guide prior to replacing your Display Assembly. This guide covers the detachment and assembly of the display.

Hazards

Keep out of reach of children and pets.

DO NOT attempt to teardown or repair your device under the influence of drugs or alcohol.

DO NOT ingest any parts of the system.

Use the correct tools as stated in the tools section.

DO NOT touch any gold connectors on interior or exterior of the system.

Make sure system is unplugged and turned off before performing any maintenance on the system.

Abschnitte

Schritt 1 screen  ¶ 

Caution: Be careful of snags when pulling up assembly and speakers. To remove the VGA cable, lift up on the metal bracket and gently lift the connector off the logic board.

Schritt 1 screen  ¶ 

  • Caution: Be careful of snags when pulling up assembly and speakers.

  • To remove the VGA cable, lift up on the metal bracket and gently lift the connector off the logic board.

  • To remove the webcam cable, lift up the connector from the logic board gently.

Schritt 2  ¶ 

Unscrew the four securing screws, two on each side of the LCD. Carefully remove the LCD. The speaker, bluetooth, and webcam assembly will come up with the display assembly. Caution: Be careful of snags when pulling up display and speaker assemblies.

Schritt 2  ¶ 

  • Unscrew the four securing screws, two on each side of the LCD.

  • Carefully remove the LCD. The speaker, bluetooth, and webcam assembly will come up with the display assembly.

  • Caution: Be careful of snags when pulling up display and speaker assemblies.